Rotary Vane Pumps

Blackmer is the world’s leading manufacturer of Rotary Vane pumps. The sliding vane design compensates for normal wear in the pumping chamber, ensuring "like new" performance throughout the life of the pump.

• Port Size: 40mm to 250mm
• Max. Flow Rate: 8,700 l/m
• Max. Discharge Pressure: 10 bar
• Max. Fluid Temperature: 260ºC
• Construction Materials: Cast Iron, Ductile Iron, Stainless Steel, Cast Steel.
• Applications: Suitable for petroleum products, liquefied gases, chemicals, liquid foods, inks, paints, oils, solvents, bitumen, abrasive slurries, corrosive fluids, thin or viscous liquids.

System One ANSI Process Pumps

Blackmer System One ANSI process pumps are high strength, low maintenance centrifugal pumps designed specifically for tough, extreme environments. They have heavy-duty, solid, low deflection shafts to prevent vibration damage and patented labyrinth seals to provide wear protection for radial and thrust bearings. 

• Port Size: 50mm to 200mm
• Max. Flow Rate: 725 m3/hr
• Max. Discharge Pressure: 20 bar
• Max. Fluid Temperature: 400°C
• Construction Materials: Ductile Iron, Stainless Steel, Alloy 20, CD4MCu, Hast B, Hast C.
• Applications: Suitable for waste treatment, food and chemical processing, pulp and paper and many other arduous duties not suitable for a standard centrifugal pump.

Dry Break Couplings

Emco Wheaton DRY-BREAK Couplers and Adapters are designed for total safety in low-pressure, petroleum and light chemical applications. Fluid cannot flow until the Emco Wheaton coupler has been locked into position on an Emco Wheaton Adapter and the valve opened. The coupler can only be disconnected from the adapter when the valve has been closed. Since product loss is thereby eliminated, possible hazards associated with leakage at disconnect are no longer a concern.

Marine Loading Arms

Emco Wheaton designs and manufactures a wide range of Marine Loading Arms to load and unload almost any liquid and compressed gas product from river barges, ships and ocean going super tankers. Pantograph balanced mechanical link technology provides the stability and strength for this most demanding task.

API Couplings

Emco Wheaton has recently enhanced their family of class leading API Couplers – the most comprehensive range of API couplers available in the market today. Each coupler incorporates a host of patented features, which will provide trouble free operation and will also ensure a clean, spill free loading rack. The couplers are approved world-wide and recommended by the world’s major oil companies, operating successfully in some of the most demanding environments.

Refueling Nozzels

Emco Wheaton supplies a range of solutions for your fueling challenges. Automatic shut-off fueling systems have been developed for transit buses, mining and other off-highway vehicles, gantry cranes, and locomotives. Overwing fueling solutions have been developed for general and military aviation including small aircraft and helicopters.

Tank Fittings

Stainless steel valves and fittings for transportation equipment in the road tanker and container Industries including ISO and IBC.

• • - Burst Discs
  • - Pressure Vacuum Valves
  • - Safety Valves
  • - Manlid Equipment

Please contact us for your requirements. More product information is available on the Fortvale website.

Self Priming Motor Driven Pumps

• Port Size: 25mm to 100mm
• Max. Flow Rate: 2600 l/m
• Max. Discharge Pressure: 78 metres
• Max. Fluid Temperature: 80ºC
• Construction Materials: Cast Iron, Zinc Free Bronze, 316 Stainless Steel.
• Applications: Suitable for waste water, sewage, solids laden liquids, dewatering, firefighting, chemicals and general industrial, marine, agricultural and farm applications.

Self Priming Bare Shaft Pumps

• Port Size: 25mm to 100mm
• Max. Flow Rate: 2850 l/m
• Max. Discharge Pressure: 77 metres
• Max. Fluid Temperature: 80°C
• Construction Materials: Cast Iron, Zinc Free Bronze, 316 Stainless Steel.
• Applications: Suitable for waste water, sewage, solids laden liquids, dewatering, firefighting, chemicals and general industrial, marine, agricultural and farm applications.

End Suction Centrifugal Pump

• Port Size: 32mm to 250mm
• Max. Flow Rate: 340 l/s
• Max. Discharge Pressure: 16 bar
• Max. Fluid Temperature: 95°C
• Construction Materials: Cast Iron.
• Applications: Suitable for handling water and similar liquids, mainly used in water supply, air conditioning, irrigation, pressure boosting, heating and ventilating, industrial.

Multistage High-Pressure Centrifugal Pump

• Port Size: 32mm to 150mm
• Max. Flow Rate: 236 l/s
• Max. Discharge Pressure: 63 bar
• Max. Fluid Temperature: 200ºC
• Construction Materials: Cast Iron. Hydraulic elements: Bronze, Cast Steel, Alloyed Cast Steel.
• Applications: Suitable for general water supply, pressure boosting, drinking water supply, irrigation, heating, boiler feed water, washing systems, fire-fighting systems, lubricants, fuels, solvents.

Submersible Pumps

• Port Size: 50mm to 200mm
• Max. Flow Rate: 300 l/s
• Max. Discharge Pressure: 65 metres
• Construction Materials: Hard Iron, Stainless Steel, 28% Hard Chrome.
• Applications: Suitable for steel mills, refineries, chemical plants, mines, pulp & paper plants, power plants and other industries with slurry pumps.

Metering Pumps

• Port Size: 9.5mm to 25mm
• Max. Flow Rate: 1500 l/h
• Max. Discharge Pressure: 20 bar
• Max. Fluid Temperature: 80°C
• Construction Materials: Stainless Steel, PVC & PVDF.
• Applications: Suitable for high accuracy metering and dosing of chemicals, add mixtures in many industries.

Positive Displacement Flow Meters

• Port Size: 40mm to 200mm
• Max. Flow Rate: 3785 l/m
• Max. Discharge Pressure: 100 bar
• Max. Fluid Temperature: 71°C
• Construction Materials: Aluminium, cast iron, brass, stainless steel, or steel.
• Applications: Suitable for petroleum, diesel, oil, chemicals, liquefied gases and more.

Mechanical Flow Registers

Mechanical Registers are ideal for applications without electrical power, and can be installed on virtually all LC meters.

Tank Protection Systems

Scully Signal is the world leader in fail-safe overfill protection for petro-chemical road tankers and fixed storage tanks. It is standard equipment in use at most New Zealand fuel terminals. Scully employs self checking failsafe technology in all its designs.

Electronic Tank Truck Systems

provide Dynamic Self-Checking® overfill protection, as well as grounding verification for tank trucks that carry/haul petroleum and liquid chemicals. IntelliCheck®2, an on-board overfill prevention and retained product monitoring system for tank trucks and refuelers, is the flagship of Scully's Electronic Truck Product line that features Dynacheck®, Scully's patented, automatic and continuous self-checking circuitry.

Electronic Terminal Systems

provide Dynamic Self-Checking® overfill protection, as well as grounding verification for bottom loading terminals which load petroleum and liquid chemicals into tank trucks and rail tank cars. These systems control fills and eliminate spills of tanker trucks and work best with tank trucks outfitted with sensors pioneered by Scully.

Electronic Storage Tank Faylsafe® Overfill Prevention and Liquid Level Control Systems

provide Dynamic Self-Checking® monitoring of, and overfill alarms for, storage tanks. Scully Storage Tank Systems also provide for the capability of controlling pumps and valves for immediate and automatic shutdown of product flow.

Electronic Flow Registers

These are easily retrofitted to any brand of flow meter. May be used for batching or preset bulk deliveries and may be mounted remotely from the flow meter.

• Approvals: This register has approvals for operation in Zone 1, Class IIb to SAA standards (Australia AS2380), and Weights and Measures (NSC Australia) approval for fitting to any approved flow meter.

Oil Terminal Equipment

Treloar's products are used extensively in the fuel industry. 

• - Loading Arms
• - API Tanker Fittings
• - Chemical Tanker Fittings

Please contact us for your requirements. More product information is available on the Treloar website.

Gear Pumps

• Port Size: 50mm to 100mm
• Max. Flow Rate: 950 l/m
• Max. Discharge Pressure: 13.8 bar
• Max. Fluid Temperature: 316°C
• Construction Materials: Cast Iron, Carbon Steel, Stainless Steel.
• Applications: Suitable for bulk transfer, chocolate, asphalt, high temperature fluids and chemical processing.

Metal Air Operated Diaphragm Pumps

• Port Size: 6mm to 100mm (1/4" to 4")
• Max. Flow Rate: 1174 l/m
• Max. Discharge Pressure: 8.6 bar – High Pressure model to 20.7 bar
• Max. Fluid Temperature: 176.7°C
• Construction Materials: Body - Aluminium, Cast Iron, Stainless Steel. Elastomers - Buna-N®, Neoprene, EPDM™, Polyurethane, Saniflex™, PTFE, Viton®, Wil-Flex™.
• Applications: Suitable for applications within the Chemical, Paints & Inks, Plating & Finishing, Pulp & Paper, Oil & Gas and Waste Treatment industries.

Plastic Air Operated Diaphragm Pumps

• Port Size: 6mm to 76mm (1/4" to 3")
• Max. Flow Rate: 784 l/m
• Max. Discharge Pressure: 8.6 bar
• Max. Fluid Temperature: 176.7°C
• Construction Materials: Body - Polypropylene, PVDF. Elastomers - Buna-N®, Neoprene, EPDM™, Polyurethane, Saniflex™, PTFE, Viton®, Wil-Flex™.
• Applications: Suitable for applications within the Chemical, Paints & Inks, Plating & Finishing, Pulp & Paper, Oil & Gas, Waste Treatment and Semiconductor industries.