Marine

The 855 Series is Carver's offering specifically designed to meet the needs of Filtrate Pump users. Since developed in the late 1950s at the request of a large Original Equipment Manufacturer (OEM) of vacuum filtration equipment, a wide variety of options are now being included as standards into each pump produced. Flange mounting directly to the receiver tank eliminates suction piping/NPSH problems and allows pumping to resume even after short periods of interrupted flow. Capable of operating in vacuum conditions up to 26" Hg, the specially designed semi-open impeller assures pumping from a trickle to full capacity.

Carver filtrate pumps can be used to replace Krogh pumps, which although widespread across the NZ pulp & Paper industry, Krogh have disappeared.

Grundfos offers a wide range of dosing pumps representing state-of-the-art technology.

Digital Dosing solutions (SMART Digital, DME, DDI) set new standards in liquid chemical handling and accuracy. The operator can easily install and set up the pump to discharge exactly the quantity of dosing liquid required for the process in a unique drive- and flow-control management concept. The setting of the pump is displayed in ml/h, l/h or gph, and the operation mode is easily identified by means of icons.

The DMH mechanical hydraulic dosing pump range is the preferred choice for industrial and complex tasks. The DMH range is a series of extremely strong, robust pumps for applications where a substantial dosing range and high-pressure capabilities are required

‍

Heavy Duty fully transportable engine driven pumps for a wide range of applications. QP Aussie pumps are designed for local conditions and the range is extensive enough to cover applications.

Fire Fighting Pumps - Designed to out-perform and out-feature all other portable firefighting pumps, the Aussie Fire Chief is the flagship of the Aussie series. The range includes 2” and 3” fire fighting pumps delivers flows to 510 lpm (litres per minute) and heads to 98 metres.

Trash Pumps - Rugged trash pumps in 2”, 3” and 4” with flows to 1800 lpm, heads to 27 metres and suction lift to 7.6 metres. The pumps feature a big front mounted 'cleanout' port and high SG, cast iron, non clog style, open impeller and volute system designed to pump solids in suspension and resist wear.

Transfer Pumps - Aussie gushers (transfer pumps) are available in a range of sizes from 2” to a massive 6″ inlet/outlet. Designed to be ultra reliable, these pumps have applications in the transfer of high volumes of liquid at relatively low pressures. Flows of up to 2900 lpm, (QP602) with heads of up to 33 metres.

‍

‍

‍

Nomad polypropylene air operated double diaphragm (AODD) pumps offer the following technical advantages:

• Self priming
• Ability to dead head
• High pressure
• Chemical compatibility
• Air powered
• Variable speed
• Easy maintenance
• Hygienic materials available
• Heavy duty
• Reliable

Lubrication & Circulation Pumps

Tuthill lubrication pumps handle a wide range of viscosities and sustain a constant flow at any pressure.

Standard Metering Pumps are engineered to safely measure and dispense preset batches of product from drums and tanks. The unique design eliminates the need for scales and pails as product can be metered directly out of your source vessel. Available in both Industrial and Sanitary configurations.

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line ofExplosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.

Our complete range of pump tubes provide an ideal solution for applications ranging from corrosive chemicals to light oils. Pump tubes are available in Polypropylene, PVDF, CPVC, Stainless Steeland Aluminum.

Our 3A Sanitary Pumps are a hygienic solution specifically designed for the dairy process industry. The 3A pumps feature over-molded diaphragms and a swivel stand.

Blackmer® S Series screw pumps are self-priming, double-ended, positive displacement pumps that offer outstanding performance in the most demanding applications regardless of temperature, viscosity or pressure. The twin and triple screw designs provide complete axial balancing of the rotating screws and their timing technologies eliminate metal-to-metal contact within the pump.

‍

Blackmer® offers Ebsray® RC Series regenerative turbine pumps to the Americas market for LPG (propane) and Autogas applications. Regenerative turbine pumps are also known as peripheral pumps or centrifugal regenerative pumps.

Recognized as a global leader in Autogas handling applications – with decades of reliable performance in thousands of installations worldwide – Ebsray regenerative turbine pump products are known for efficiency, reliability, and performance.

Ebsray RC Series regenerative turbine pumps have been specifically designed and precision-built for high-pressure transfer in Autogas applications. The secret to the success of these pumps is the innovative impeller design, which optimizes hydraulic performance resulting in high differential pressures even at low flow rates, a critical consideration for Autogas applications. Ebsray turbine pumps also feature a smooth, quiet operation and long pump life.

‍

The System One Centrifugal Pumps are designed specifically to operate in severe process industry applications, and contain oversized bearings to offer greater load capacity and extended bearing life. These pumps increase productivity, while offering maximum reliability in the toughest of applications, such as mining de-watering, chemical process and water/wastewater treatment.

Petrochemicals generate starting products for the manufacture of plastics, pharmaceuticals, colorants, detergents, and other products. The most important operations are the various splitting or cracking processes (e.g. steam cracking, hydrocracking). These processes convert long-chained hydrocarbons (e.g., naphtha) into short-chained ones.

LEWA supports your production plants with effective additive metering, as well as with the conveying and treatment of washing water and sour water.

LEWA offers you specialized solutions for the metering and conveyance of the required chemicals and products. We design pumps and systems to suit your requirements and offer you all-round support for processes such as hydrocracking.

‍

LEWA is known worldwide as a specialist and market leader in the handling of supercritical fluids and the use of diaphragm metering pumps, packed plunger metering pumps and process pumps.

LEWA pumps provide high metering accuracy and are durable, reliable, safe and highly efficient.

‍

LEWA diaphragm and plunger pumps, which are reciprocating positive displacement pumps, provide the greatest possible metering accuracy. They set the standard for safety, reliability and efficiency, especially when it comes to pumping supercritical fluids.

Every metering pump made by LEWA is designed with particular strengths: Whether your needs include energy-efficiency, low maintenance costs, or an extremely long service life for diaphragms. Or perhaps you are looking for a metering pump model that can handle supercritical fluids and liquid gas, or one that meets the highest requirements and demands of the oil and gas, chemistry, cosmetics, pharmaceutical and biotechnology, or food and beverage industry.

‍