Applications

Effluent

Aussie QP Engine Driven Trash / Fire Pumps

Heavy Duty fully transportable engine driven pumps for a wide range of applications. QP Aussie pumps are designed for local conditions and the range is extensive enough to cover applications.

Fire Fighting Pumps - Designed to out-perform and out-feature all other portable firefighting pumps, the Aussie Fire Chief is the flagship of the Aussie series. The range includes 2” and 3” fire fighting pumps delivers flows to 510 lpm (litres per minute) and heads to 98 metres.

Trash Pumps - Rugged trash pumps in 2”, 3” and 4” with flows to 1800 lpm, heads to 27 metres and suction lift to 7.6 metres. The pumps feature a big front mounted 'cleanout' port and high SG, cast iron, non clog style, open impeller and volute system designed to pump solids in suspension and resist wear.

Transfer Pumps - Aussie gushers (transfer pumps) are available in a range of sizes from 2” to a massive 6″ inlet/outlet. Designed to be ultra reliable, these pumps have applications in the transfer of high volumes of liquid at relatively low pressures. Flows of up to 2900 lpm, (QP602) with heads of up to 33 metres.

Aussie QP Engine Driven Trash / Fire Pumps
  • Construction site dewatering
  • Waste water handling
  • Effluent pump out
  • Livestock waste water disposal
  • Solid laden mine waste pump out
  • Fire fighting pumps, mop up & fire protection
  • High pressure water transfer
  • Spray irrigation
  • Diesel fuel transfer
  • High pressure spraying
  • Boom spraying
  • Wash down
  • High volume water transfer
  • Fast fill tanker applications
  • Flood irrigation
  • Construction site dewatering

Nomad Powerflo Polypropylene Pumps

Nomad polypropylene air operated double diaphragm (AODD) pumps offer the following technical advantages:

  • Self priming
  • Ability to dead head
  • High pressure
  • Chemical compatibility
  • Air powered
  • Variable speed
  • Easy maintenance
  • Hygienic materials available
  • Heavy duty
  • Reliable
Nomad Powerflo Polypropylene Pumps
Sharpe Mixers

Sharpe Mixers Clamp Mounted Direct Drive and Gear Drive Portable mixers

  • White powder-coated nosecone.
  • Single or dual hyflo impellers.
  • Shaft rpm is 1750
  • This mixer line has been refined and improved over the years to assure that every component has significant advantages over other mixers on the market.
  • From the nearly indestructible white powder-coated finish to the stainless-steel mounting clamp, from the vapor-tight coupling housing to the quality-10 gearing, you can be confident that your Sharpe Mixer will look and operate like new after years of duty.

Sharpe Mixers
Standard Industrial Motors

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line ofExplosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.

Standard Industrial Pump Tubes

Our complete range of pump tubes provide an ideal solution for applications ranging from corrosive chemicals to light oils. Pump tubes are available in Polypropylene, PVDF, CPVC, Stainless Steeland Aluminum.

Resources
No items found.
Graco Process Pumps -Air Operated Diaphram Pumps

An air operated diaphragm pump (also known as AODD pump or membrane pump) is a type of positive displacement pump that uses compressed air as a power source. The compressed air is shifted from one chamber to the other by a linked shaft that allows the chambers to move simultaneously. This back-and-forth motion, forces liquid out of one chamber and into the outlet manifold, while filling the opposite fluid chamber via the inlet manifold. Upon changeover, the fluid section that was filled on the previous shift empties into the outlet manifold and the fills the opposite chamber via the inlet manifold. The rapid changeover allows for reduced pulsation at the outlet.

WETTED COMPONENT OPTIONS

  • Acetal
  • Kynar
  • Polypropylene

CENTER SECTION

  • Polypropylene
  • Santoprene
  • PTFE

DIAPHRAGM OPTIONS

  • Supply pump for OEM applications
  • Printing ink supply
  • Chemical supply for wastewater and sanitary applications
  • Plating/surface finishing
  • Chemical dosing
  • Car wash chemicals
  • Laundry chemicals and detergents (hotel/resorts)

Graco Process Pumps -Air Operated Diaphram Pumps

Designed with fewer parts than competitive pumps, Graco’s air operated double diaphragm pumps features our stall-free, low pulsation air valve, which is externally accessible—ensuring rapid changeovers and minimum downtimes.

Graco’s electric double diaphragm pumps (EODD) are ideal for applications that require low pulsation and a smooth flow. Our energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps.

Each pump is ruggedly constructed to resist corrosion and deliver a long, trouble-free product life.

The Graco diaphragm pumps come in a wide range of air operated and electric diaphragm pumps (ATEX models available). You can also choose from a extensive selection of materials to handle numerous applications, including corrosive and abrasive fluid transfer.

Graco Process Pumps-Industrial Peristaltic Pumps

Electric-powered hose pumps are ideal for use in industrial fluid transfer and metering applications. Abrasive, corrosive, shear sensitive, and gas-entrapped fluids can easily be pumped or dosed into your application. A broad set of benefits includes long hose life, numerous electric motor options and low operating costs.

Graco Process Pumps-Industrial Peristaltic Pumps

Expect a longer hose life with 360-degree single roller and only one hose compression per revolution, reducing hose wear significantly.Depending on your requirements, Graco’s industrial peristaltic pumps are available with AC and Brushless DC motor options, including motors for hazardous locations.

Our reciprocating positive displacement pumps are very inexpensive to maintain without valves, seals or glands, and easy access to maintenance point

  • Efficient Pumping Action – One hose compression per revolution extends hose life
  • Low Maintenance – No valves, seals or glands
  • Reversible – Pumps can be used to empty lines or clear blockages
  • Extended Hose Life – Only one hose compression per revolution

Resources
No items found.
Graco Process Pumps-Industrial Piston Pumps

Graco's powerful line of piston pumps move extremely difficult materials when other pump cannot. SaniForce piston pumps can offer fluid pressures up to 1,200 psi (83 bar) handling even the toughest materials. Designed for industrial or hygienic applications, Graco has a pump to suit your application.

Graco Process Pumps-Industrial Piston Pumps

Graco's powerful line of piston pumps move extremely difficult materials when others cannot. SaniForce piston pumps have fluid pressures up to 1,200 psi (83 bar) handling even the toughest materials.

Graco’s powerful line of piston pumps move difficult materials when others cannot. Fluid pressures of up to 1,200 psi (83 bar) are ideal for low to medium viscosity materials such as beverages, juices and sauces.

Quick knockdown lowers are made with corrosion resistant stainless steel and feature easy to clean sections, improving overall efficiency.

Resources
No items found.
Graco Process Pumps-Electric Diaphragm Pumps

Would you like to eliminate unnecessary pump failures for your application? Would you like to improve your facilities energy efficiency and create a quieter and cleaner work environment for your employees? Graco’s Husky e-Series pumps will help you achieve all of those items!

Graco Process Pumps-Electric Diaphragm Pumps
  • Only electric diaphragm pump on the market that will stall under pressure
  • Up to 80% more efficient than air operated diaphragm pumps
  • Reduce pulsation without the addition of pulsation dampeners
  • Patent pending technology allows pump to stall under pressure preventing pump failures from
    clogged lines or closed valves
  • Energy efficient electric drive reduces energy consumption up to 80% compared to traditional air
    operated diaphragm pumps
  • Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
  • Request a demo and see interactive information at www.graco.com/e-series

Resources
No items found.
Wilden Parts and Accessories

Wilden’s accessory products offer flexibility and value to your liquid process and expand the application range of Wilden pumps by complimenting the performance and specification of your pump. Wilden electronic controllers automate your Wilden pump for batching, and other electronically controlled dispensing applications and processes. By eliminating pump pulsation we can also create laminar process flow, or control the liquid level within a system or process.

Wilden Parts and Accessories

Features and Benefits:

       
  • Effectively dampens up to 70% of discharge pressure pulsation 
  •    
  • Protects against water hammer and associated damage    
  •    
  • Utilises the same standardised wear components as Wilden diaphragm pumps    
  •    
  • Self-adjusting to various system pressures    
  •    
  • Large solids capacity    
  •    
  • Configurable to meet ATEX II 2 GD X requirements

Nomad Diaphragm After-Market Pump Parts

DA GLOBAL features thousands of after-market parts IN STOCK in our California-based, 15,000 sq. ft. facility. We specialize in after-market parts for WILDEN®, WARREN RUPP® and ARO®, among others. Large tooling investments allow us to bring forth hundreds of new parts every 6 months, making NOMAD the undisputed leader in its industry.

Nomad Diaphragm After-Market Pump Parts

JDA GLOBAL LLC (est. 2011) serves as the world's largest & most experienced after-market diaphragm pump products provider. World class supply chain management, coupled with a proven track record in distribution development brings forth strong customer satisfaction. Linked with LOW COST, HIGH QUALITY products, rapid delivery and "easy to do business with" customer service, we strive for a "customer for life" strategy and fulfillment.

Resources
No items found.
Nomad Powerflo Metal Pumps

Air diaphragm pumps are widely used in a variety of applications due to their versatility. Air operated double diaphragm pumps feature few moving parts, with no motor, base plate or other peripherals required. The design style, coupled with its positive displacement functionality, allows for the transfer of shear sensitive products with self-priming up to 25 feet. Air diaphragm pumps feature low initial investment as well as low replacement costs for wear parts when compared to other pump types.

Atex options are available

Nomad Powerflo Metal Pumps

Nomad Diaphragm Pumps are interchangeable with their Wilden counterparts but are significantly more cost effective and excellent quality. This means that while being an extremely reliable alternative to Wilden, there is no need to spend time and money changing pipework in order to lock in the cost savings.

Backed by all American JDA Global you can find confidence in a five year limited warranty.

Nomad Diaphragm Pumps are available in four different body materials; aluminium, ductile iron, stainless steel and polypropylene with all major elastomers. They come in seven port sizes; 1/4", ½", 1", 1 ½" ", 2" 3" and 4". All are capable of self priming, dry running, solids handling and high pressures.

Sold worldwide, these pumps are suitable for a full spectrum of applications from mining and construction, oil, ceramic, resin and chemical transfer to sanitary such as food & beverage. AODD pumps are particularly suitable for pumping chemicals, petroleum, foods, beverage, cleaning solutions, slurry, waste water, adhesives, pharmaceuticals and higher viscosity fluids.

Nomad Transgold Metal Pumps

The TRANS-FLO gold product line features a rugged anodized aluminum piston-style air valve system, capable of functioning in the harshest compressed air conditions, emphasis on mining, construction and utilitarian applications. The TRANS-FLO GOLD system also features the fewest moving parts in the diaphragm pump business, allowing for ease of maintenance, assembly and disassembly.

Nomad Transgold Metal Pumps

NOMAD features diaphragm pumps in 7 sizes (1/4", ½" 1", 1.5", 2" 3" and 4") and 4 body materials (aluminum, ductile, stainless steel and polypropylene). All major elastomer options are available. With our simple proven design, NOMAD diaphragm pumps are versatile and can handle the toughest applications, from mining and construction to oil, ceramic, resin and chemical transfer.

Netzsch Grinders

We are your first choice for the grinding of dry products!
From A (activated carbon) to Z (zinc) - we offer the right mill for your product.

Our extensive experience and wide range of mills are available for the fine cutting, fine grinding and ultra-fine grinding of dry products of all desired finenesses.

High-performance classifiers for the finest of products, round off our program.

Netzsch Grinders

From individual mills to complete turnkey milling systems; non-PSR or dust explosion protected plants up to 10 BAR PSR (pressure shock resistant) and inert gas plants are available; material executions in a diversity of designs including stainless steel with polished surfaces or wear protected models - We have the perfect solution for you!

Resources
No items found.