Applications

Energy and Power

WEIR Knife Gate Valves

As specialists in WARMAN pumps we are also proud to offer the WEIR range of knife gate valves, including the USA made Delta range and more cost effective ISOgate range. The range also includes pneumatic pinch valves, mining quality check vales (non return) and the Autoball AB3 valve.

There are a number of processes within a mine site which require specialised valves designed to handle highly abrasive environments.

Delta Industrial™ knife gate valves are ideal for many of these demanding processes.

Mill circuit

The mill circuit presents a number of issues when selecting a valve. Large particle sizes, high percentages of solids, and high specific gravity make selecting the correct valve critical to achieving the least possible downtime. We can customise our Delta Industrial™ valves to provide optimal performance in any part of the mill circuit. The Delta Industrial™ 15 series and Centre, Block and Bleed (CBB) valves provide outstanding isolation performance, with zero leakage shut-off and no discharge to the nvironment during operation.

Tailings and slurry transport

Tailings consist of ground rock and process effluents that are generated in a mine processing plant. Mechanical and chemical processes are used to extract the desired product from the run of the mine ore and produce a waste stream known as tailings. The pressure in these lines can exceed 50bar (725psi), necessitating engineered valve solutions for safe and reliable operation. We have developed the Delta Industrial™ 60 series valves for such applications, being capable of handling 102bar (1480psi).

WEIR Knife Gate Valves

Typical applications

• Alumina

• Cement

• Coal

• Kaolin

• Mineral sands

• Hard rock mining

• Phosphates

• Pulp and paper

• Sand and gravel

• Soda ash

• Wet flue gas desulphurisation

Tuthill Gear Pumps

Gear pumps are positive displacement pumps, available in a variety of designs, but there are two basic types: external and internal. External gear pumps consists of two identical, interlocking gears supported by separate shafts. Internal gear pumps have two interlocking gears of different sizes with one rotating inside the other.


Typical applications include:
- Petroleum
- Water
- Resins and Polymers
- Fats and Oils

Pump & Machinery offer a wide range of gear pumps from a variety of manufacturers, we stock Tuthill pumps and parts.

Tuthill Gear Pumps

The main advantages include:
- Compact and light weight
- Great for a wide range and changeable viscosities
- High efficiency (up to 98%)
- Cost effective
- Very low pulsation
- Limited self priming (seek advise)
- Low or high speed running
- High temperatures - over 300°C

The main disadvantage include:
- Noisy
- Cannot be run dry
- Don't use with abrasive mediums

Warman Q series Axial Flow Pumps

Do you need heavy duty equipment capable of continuously pumping everything from corrosive and abrasive to clean and solid contaminated fluids? How about something which is reliable with low energy consumption and maintenance costs? If you thought that’s too good to be true, you’re mistaken. Meet the Warman Q-Series family of axial flow pumps.

Available in a wide range of materials and configurations to suit every situation, Warman® Q-Series pumps offer continuous circulation of fluids across a variety of applications including salt and potash, chemical, pulp and paper, mining, water treatment, biomass and food.

If you want straightforward maintenance, minimal operating costs and long wear life, get in touch with our team of Warman® axial flow pump experts.

Warman Q series Axial Flow Pumps
Warman - Vertical Slurry Pump

Weir Minerals pump division Warman, produce the world's leading slurry pumps. The SP and SPR range of vertical slurry pumps are true cantilevered designs. They incorporate extremely wear resistant metals or polymer covering to withstand abrasion.

Applications in NZ and the South Pacific Include:

  • Dredging
  • Sand Mining
  • Minerals Processing
  • Chemical processing
  • Effluent Handling
  • Sand and Gravel
  • And almost every other pit, tank or hole in the ground slurry application
Warman - Vertical Slurry Pump
  • 40 PV - 30m head / 12l/s
  • 65 QV - 31m head / 25l/s
  • 100 RV - 34m head / 75l/s
  • 150 SV - 43m head / 105l/s
  • 200 TV - 36m head / 220l/s
  • 250 TV - 31m head / 330l/s
Carver GH End-Suction Centrifugal Pump

GH

Available as either a frame-mounted (GHF) or close-coupled (GHC) unit, the GH is based on the same product platform as our vertical pumps and shares many of the same parts.

For added simplicity, the entire series is covered by only three bearing frames and comes in whole pump or modular kit form. The GHC is fully compatible with standard, off-the-shelf NEMA JP and JM frame motors, and all models feature a back pull-out design and casings rotatable in 90° increments for different field piping orientations

Carver GH End-Suction Centrifugal Pump

Other common features for the GH include 316 SS shaft sleeves, keyed impellers to prevent accidental spin off, dynamic balancing to ISO G2.5 guidelines, and re re greaseable bearings secured with locking rings, as standard. These features combine to produce shaft deflection values so low that they exceed the requirements of ANSI B73.1M-1991 and overall, provide some of the most efficient hydraulics in the industry.

Options for the JP include replaceable wear rings, cartridge seals, and flush plans. Along with these, higher alloy material options such as Ni-Al-Br and CD4MCuN and a full range of motor and baseplate choices are also available.

Carver Pump API Maxum OH2 API 610 Compliant End-Suction Pump

The API Maxum OH2 is designed for optimum reliability, featuring rugged construction and state-of-the-art mechanical design. Units are well suited for applications that include petroleum refining/production/distribution, petrochemical/chemical processing, boiler circulation/high- temperature applications, and general industrial use. A workhorse in the industry, these pumps are designed for years of service, in some of the toughest environments imaginable.

This model is fully compliant with latest edition API 610 specifications. Standard features include renewable casing wear rings, API 610 seal chamber sized to accommodate 682 mechanical seals, back pull-out construction, dynamically-balanced impellers, heavy-duty carbon steel/finned bearing housing equipped with labyrinth-type oil seals, and fan cooling. Locations are also included for temperature probes, as standard. Common options include single, double or tandem mechanical seals, and various seal flush systems. Heavy-duty baseplates, casing jackets, and various levels of performance testing are also available.

Carver Pump API Maxum OH2 API 610 Compliant End-Suction Pump

API Maxum OH2

The API Maxum OH2 is designed for optimum reliability, featuring rugged construction and state-of-the-art mechanical design. Units are well suited for applications that include petroleum refining/production/distribution, petrochemical/chemical processing, boiler circulation/high- temperature applications, and general industrial use. A workhorse in the industry, these pumps are designed for years of service, in some of the toughest environments imaginable.

This model is fully compliant with latest edition API 610 specifications. Standard features include renewable casing wear rings, API 610 seal chamber sized to accommodate 682 mechanical seals, back pull-out construction, dynamically-balanced impellers, heavy-duty carbon steel/finned bearing housing equipped with labyrinth-type oil seals, and fan cooling. Locations are also included for temperature probes, as standard. Common options include single, double or tandem mechanical seals, and various seal flush systems. Heavy-duty baseplates, casing jackets, and various levels of performance testing are also available.

Together, these features combine to produce some of the most efficient hydraulics in the industry and shaft deflection values meeting or exceeding those of API 610 requirements. The API Maxum OH2 is also available as an OH1 design for lower temperature applications.

Carver Pump Ltd RS Multistage,Ring Section Pump

Multistage, Ring Section Pump

Our process duty, horizontal ring section multistage pump. Designed for moderate to high-pressure pumping, the RS is available in seven basic sizes with overall performance to 2,600 HP.

Carver Pump Ltd RS Multistage,Ring Section Pump

For Pressures to 1,500 PSI

The RS is offered with Class 300 ANSI R.F. inlet flanges and Class 600 or 900 ANSI R.F. discharge flanges, depending on the pressures and number of stages involved. Hydraulic performance extends to 2,000 GPM and 3,400 ft. TDH, making it ideally suited for the most demanding industrial and process applications.

The RS design incorporates a product-lubricated, advanced composite material, sleeve-type radial bearing at the outboard (discharge) end. The thrust bearings are two matched angular contact ball bearings located at the inboard (suction) end of the pump. An optional outboard mechanical seal with an inboard radial ball bearing is also available. The RS has oil-lubricated ball bearings, which can be water cooled. Larger units can also be fan cooled.

The available materials of construction, from ductile iron to duplex stainless steel, offer combinations suitable for all applications from general water services to light abrasives and corrosive applications. Our proprietary advanced composite material, available for wear rings and interstage bushings, offers high-temperature performance, and exceptional resistance to wear and corrosion.

Carver Pumps -855 Filtrate Pump, Close coupled and overhead Mounted Pumps

The 855 Series is Carver's offering specifically designed to meet the needs of Filtrate Pump users. Since developed in the late 1950s at the request of a large Original Equipment Manufacturer (OEM) of vacuum filtration equipment, a wide variety of options are now being included as standards into each pump produced. Flange mounting directly to the receiver tank eliminates suction piping/NPSH problems and allows pumping to resume even after short periods of interrupted flow. Capable of operating in vacuum conditions up to 26" Hg, the specially designed semi-open impeller assures pumping from a trickle to full capacity.

Carver filtrate pumps can be used to replace Krogh pumps, which although widespread across the NZ pulp & Paper industry, Krogh have disappeared.

Carver Pumps -855 Filtrate Pump, Close coupled and overhead Mounted Pumps

Capacities range to 1000 GPM, depending on discharge head and speed of operation. Available in 6 sizes ranging from 1”-4”; standard materials of construction include All Iron, CD4MCu and Rubber Lined. The 855Series features an overhead v-belt drive arrangement as a standard, with options for close coupled or frame mounted drives. By utilizing either belt drive or variable frequency drive, performance characteristics can be fine-tuned to match most system requirements. Maintenance is simplified as the vertically split case maybe disassembled to expose the entire wetted area. Standard features include a rotatable discharge casing which allows flexibility in locating desired discharge flange orientation, packed stuffing box with seal water connections provided to insure lubrication and eliminate vacuum/air leakage and 2” diameter stuffing box bore on all units. Pumps come with discharge flanges dual drilled for both 150lb / PN 10 connections. 17-4pHstainless steel shafts are utilized to both strengthen the shaft and eliminate the need for shaft sleeves (duplex shafts with CD4MCu). Impellers are keyed to the shaft ,providing a secure fit and protection should momentary reverse rotation occur. The Swing-Out Mount is popular as an optional feature, allowing inspection of the pump or quick access to the tank interior.

Grundfos Dosing pumps

Grundfos offers a wide range of dosing pumps representing state-of-the-art technology.

Digital Dosing solutions (SMART Digital, DME, DDI) set new standards in liquid chemical handling and accuracy. The operator can easily install and set up the pump to discharge exactly the quantity of dosing liquid required for the process in a unique drive- and flow-control management concept. The setting of the pump is displayed in ml/h, l/h or gph, and the operation mode is easily identified by means of icons.

The DMH mechanical hydraulic dosing pump range is the preferred choice for industrial and complex tasks. The DMH range is a series of extremely strong, robust pumps for applications where a substantial dosing range and high-pressure capabilities are required

Grundfos Dosing pumps

Applications

The dosing pumps are designed for handling chemicals within the following applications, among others:

  • Drinking water treatment
  • Wastewater treatment
  • Cooling water treatment
  • Washing systems
  • Process water treatment
  • Chemical industry.

Features and benefits

  • Precise and easy setting
  • Unique technology
  • Small number of variants will cover all needs
  • Full pulse control
  • Pulse batch control
  • Internal timer batch control
  • Analog 0/4-20 mA control
  • Level control
  • Fieldbus communication module.

Liquid Controls LCR iQ

The future of electronic registers has arrive, and it is the LC (Liquid Controls) LCR iQ. At the center of the CENTRILOGiQ® platform is the LCR.iQ®, built from the ground up by Liquid Controls' Research & Development team and in close collaboration with customers who will benefit from it! Ease of use, process configurability, and data security were the highest priorities in the design and foundation of the LCR.iQ®.

The LCR iQ replaces the Pump & Machinery Selectronic register which has served the NZ tanker industry well for 40 plus years.

Liquid Controls LCR iQ

LCR iQ Features

User Input & Display

  • Large 7" high definition, full color video display - High clarity and easy visibility
  • Customizable home screen and delivery setup prompts - Streamline driver interface
  • Full alpha-numeric keypad and arrow selection keys - Quick, intuitive navigation
  • Instant on-board diagnostics and help screens - Quickly troubleshoot & resolve issues to minimize downtime
  • Full screen active delivery mode - Largest readable digits in the industry, viewable from up to 100'
  • Day/night mode and brightness adjustment - Operator can select preferred viewing mode for conditions
  • Customizable printed tickets - Easily tailor ticket formats without software updates
  • Transaction history logs store 10,000+ records - No more lost tickets; Easily access and print historical tickets
  • Weights & measures historical audit log and event log - Search and download by date range or field
  • Large LED back lit keypad - Easy to operate with gloved hands, easy to read in daylight or at night
  • Remote control (E-Stop) compatible to third party systems - Seamless retrofit into existing systems
  • 3rd party fleet automation connectivity and data management - Seamless retrofit into existing systems
  • Toggle flow - Optimizes fuel flow rate without driver intervention in refined fuels delivery systems
  • Wireless Printing - Operator can print from hand-held remote printer
  • Connectable with hand held devices, etc via wifi and Bluetooth.
  • Standard meter mount base - Drop-in retrofit for all conventionally mounted registers
  • Panel mount enclosure option - For remote panel mounting of LCR.iQ®
  • Preset delivery by volume or weight - Provides highest accuracy of fuel delivery to prevent over-fueling
  • 4-Bolt even seal o-ring design - Water-tight, weather-proof seal protects internal components
  • Die-cast aluminum housing - Chromate and powder coated for long term corrosion resistance.11 Conduit Ports (1/2" NPT) - To accommodate many I/O and control optionsMulti-point calibration up to 16 points - Maximize accuracy over entire flow range
  • Internal telescoping hinges - Eliminates seizing and corrosion of external door hinges
  • Serial accessibility to LCP data communication protocol - Compatible with major in-cab/back office systems
  • Electronic temperature volume compensation - Available with optional probe and thermowell kit
  • Waterproof, corrosion resistant and dust-proof - meets IP66 and UL Type 4X requirements
Sulzer Process Pumps

Sulzer are the trusted manufacturer of 'process pumps' for critical industries such as petrochem.

For details on the complete range including custom adaptation of base plates / seals / paint / etc please contact the friendly Pump & Machinery team.

Sulzer Process Pumps
  • CPE ANSI pumps are specifically designed to exceed the strictest energy regulations for all industries as well as the requirements of ANSI/ASME B73.1. With revolutionary hydraulics and high efficiency, they offer the lowest life cycle costs.
  • API 610 / ISO 13709 international standard specifies requirements for overhung, between-bearings and vertically-suspended centrifugal pumps used in petroleum, petrochemical and gas industry process services.
  • CPT chemical end suction single stage centrifugal pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs. ANSI / ASME B73.1 standard covers centrifugal pumps of horizontal, end suction single stage, centerline discharge design, including dimensional interchangeability requirements and certain design features to facilitate installation and maintenance.
Nomad Powerflo Polypropylene Pumps

Nomad polypropylene air operated double diaphragm (AODD) pumps offer the following technical advantages:

  • Self priming
  • Ability to dead head
  • High pressure
  • Chemical compatibility
  • Air powered
  • Variable speed
  • Easy maintenance
  • Hygienic materials available
  • Heavy duty
  • Reliable
Nomad Powerflo Polypropylene Pumps
Tuthill Magnetically Coupled Pumps

Since 1977, Tuthill has worked to improve magnetically driven gear pumps by engineering solutions to meet the needs of varying applications and exacting designer specifications. The result is a family of magnetically coupled pumps that have found wide industry acceptance for their versatility and robust standard of build and reliability.

Tuthill Magnetically Coupled Pumps

316 Stainless Steel or Hastelloy
Flow rates to 650gph(2460L/hr)
Differential Pressures to 250psi(17.2bar)
System Pressures to 500psi(34.5bar)
Temperatures to 350°F(176°C)

Tuthill Lubrication Pumps

Lubrication & Circulation Pumps

Tuthill lubrication pumps handle a wide range of viscosities and sustain a constant flow at any pressure.

Tuthill Lubrication Pumps

The 1000 Series is based on the proven internal gear principal and is enhanced in response from our OEM customers for a pump that offers advanced features which make installation easier. These side-ported pumps have the option to bolt SAE/DIN flanges onto them ensuring maximum flexibility on the porting arrangements. Our pump meets your technical requirements and is easily fitted into your system. Our manufacturing expertise and knowledge of applications enable us to provide you with an engineered solution and ensure satisfaction with post-sales service. We pride ourselves on properly servicing you with specification, installation, operation, and troubleshooting.  The pump was originally designed to meet and exceed the exacting requirements of the refrigeration compressor market.

Resources
No items found.
Sharpe Mixers

Sharpe Mixers Clamp Mounted Direct Drive and Gear Drive Portable mixers

  • White powder-coated nosecone.
  • Single or dual hyflo impellers.
  • Shaft rpm is 1750
  • This mixer line has been refined and improved over the years to assure that every component has significant advantages over other mixers on the market.
  • From the nearly indestructible white powder-coated finish to the stainless-steel mounting clamp, from the vapor-tight coupling housing to the quality-10 gearing, you can be confident that your Sharpe Mixer will look and operate like new after years of duty.

Sharpe Mixers