Mining

As specialists in WARMAN pumps we are also proud to offer the WEIR range of knife gate valves, including the USA made Delta range and more cost effective ISOgate range. The range also includes pneumatic pinch valves, mining quality check vales (non return) and the Autoball AB3 valve.

‍

There are a number of processes within a mine site which require specialised valves designed to handle highly abrasive environments.

Delta Industrial™ knife gate valves are ideal for many of these demanding processes.

Mill circuit

The mill circuit presents a number of issues when selecting a valve. Large particle sizes, high percentages of solids, and high specific gravity make selecting the correct valve critical to achieving the least possible downtime. We can customise our Delta Industrial™ valves to provide optimal performance in any part of the mill circuit. The Delta Industrial™ 15 series and Centre, Block and Bleed (CBB) valves provide outstanding isolation performance, with zero leakage shut-off and no discharge to the nvironment during operation.

Tailings and slurry transport

Tailings consist of ground rock and process effluents that are generated in a mine processing plant. Mechanical and chemical processes are used to extract the desired product from the run of the mine ore and produce a waste stream known as tailings. The pressure in these lines can exceed 50bar (725psi), necessitating engineered valve solutions for safe and reliable operation. We have developed the Delta Industrial™ 60 series valves for such applications, being capable of handling 102bar (1480psi).

‍

‍

‍

Gear pumps are positive displacement pumps, available in a variety of designs, but there are two basic types: external and internal. External gear pumps consists of two identical, interlocking gears supported by separate shafts. Internal gear pumps have two interlocking gears of different sizes with one rotating inside the other.
‍

Typical applications include:
- Petroleum
- Water
- Resins and Polymers
- Fats and Oils

Pump & Machinery offer a wide range of gear pumps from a variety of manufacturers, we stock Tuthill pumps and parts.

Weir Minerals pump division Warman, produce the world's leading slurry pumps. The SP and SPR range of vertical slurry pumps are true cantilevered designs. They incorporate extremely wear resistant metals or polymer covering to withstand abrasion.

Applications in NZ and the South Pacific Include:

• Dredging
• Sand Mining
• Minerals Processing
• Chemical processing
• Effluent Handling
• Sand and Gravel
• And almost every other pit, tank or hole in the ground slurry application

The API Maxum Series is Carver's offering specifically designed to meet the needs of the Hydrocarbon Processing Industry. Fully compliant with the latest edition API 610 specifications, the API Maxum is a horizontal, end suction - top discharge, centerline mounted unit. Designed for optimum reliability, these units feature rugged construction and state of the art mechanical design features. These units are well suited for applications that include petroleum refining/production/ distribution, petrochemical/chemical processing, boiler circulation/high temperature applications, and general industrial use. A workhorse in the industry, these pumps are designed for years of service, in some of the toughest environments imaginable. Created specifically for the Hydrocarbon Processing Industry, the API Maxum benefits other markets as well. Hydraulic performance extends to over 9,000 GPM and 720 feet of head. Capable of operating up to 400°F without external cooling and 600°F with cooling makes this pump ideal for mid-high temperature applications.

Multistage, Ring Section Pump

Our process duty, horizontal ring section multistage pump. Designed for moderate to high-pressure pumping, the RS is available in seven basic sizes with overall performance to 2,600 HP.

‍

Grundfos offers a wide range of dosing pumps representing state-of-the-art technology.

Digital Dosing solutions (SMART Digital, DME, DDI) set new standards in liquid chemical handling and accuracy. The operator can easily install and set up the pump to discharge exactly the quantity of dosing liquid required for the process in a unique drive- and flow-control management concept. The setting of the pump is displayed in ml/h, l/h or gph, and the operation mode is easily identified by means of icons.

The DMH mechanical hydraulic dosing pump range is the preferred choice for industrial and complex tasks. The DMH range is a series of extremely strong, robust pumps for applications where a substantial dosing range and high-pressure capabilities are required

‍

The future of electronic registers has arrive, and it is the LC (Liquid Controls) LCR iQ. At the center of the CENTRILOGiQ® platform is the LCR.iQ®, built from the ground up by Liquid Controls' Research & Development team and in close collaboration with customers who will benefit from it! Ease of use, process configurability, and data security were the highest priorities in the design and foundation of the LCR.iQ®.

The LCR iQ replaces the Pump & Machinery Selectronic register which has served the NZ tanker industry well for 40 plus years.

Heavy Duty fully transportable engine driven pumps for a wide range of applications. QP Aussie pumps are designed for local conditions and the range is extensive enough to cover applications.

Fire Fighting Pumps - Designed to out-perform and out-feature all other portable firefighting pumps, the Aussie Fire Chief is the flagship of the Aussie series. The range includes 2” and 3” fire fighting pumps delivers flows to 510 lpm (litres per minute) and heads to 98 metres.

Trash Pumps - Rugged trash pumps in 2”, 3” and 4” with flows to 1800 lpm, heads to 27 metres and suction lift to 7.6 metres. The pumps feature a big front mounted 'cleanout' port and high SG, cast iron, non clog style, open impeller and volute system designed to pump solids in suspension and resist wear.

Transfer Pumps - Aussie gushers (transfer pumps) are available in a range of sizes from 2” to a massive 6″ inlet/outlet. Designed to be ultra reliable, these pumps have applications in the transfer of high volumes of liquid at relatively low pressures. Flows of up to 2900 lpm, (QP602) with heads of up to 33 metres.

‍

‍

‍

Sulzer are the trusted manufacturer of 'process pumps' for critical industries such as petrochem.

For details on the complete range including custom adaptation of base plates / seals / paint / etc please contact the friendly Pump & Machinery team.

Nomad polypropylene air operated double diaphragm (AODD) pumps offer the following technical advantages:

• Self priming
• Ability to dead head
• High pressure
• Chemical compatibility
• Air powered
• Variable speed
• Easy maintenance
• Hygienic materials available
• Heavy duty
• Reliable

Since 1977, Tuthill has worked to improve magnetically driven gear pumps by engineering solutions to meet the needs of varying applications and exacting designer specifications. The result is a family of magnetically coupled pumps that have found wide industry acceptance for their versatility and robust standard of build and reliability.

Lubrication & Circulation Pumps

Tuthill lubrication pumps handle a wide range of viscosities and sustain a constant flow at any pressure.

Sharpe Mixers Clamp Mounted Direct Drive and Gear Drive Portable mixers

• White powder-coated nosecone.
• Single or dual hyflo impellers.
• Shaft rpm is 1750
• This mixer line has been refined and improved over the years to assure that every component has significant advantages over other mixers on the market.
• From the nearly indestructible white powder-coated finish to the stainless-steel mounting clamp, from the vapor-tight coupling housing to the quality-10 gearing, you can be confident that your Sharpe Mixer will look and operate like new after years of duty.

‍

Standard Metering Pumps are engineered to safely measure and dispense preset batches of product from drums and tanks. The unique design eliminates the need for scales and pails as product can be metered directly out of your source vessel. Available in both Industrial and Sanitary configurations.

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line ofExplosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.