Petroleum

The single and two stage Blackmer reciprocating gas compressors create a low-pressure area in the pumping chamber when the piston moves from the highest point of the stroke to the lowest. Gaseous product (at a higher pressure in the tank) moves into the pumping chamber of the gas compressor. This volume of gas is then displaced when the piston moves to the top of the stroke.

Many food manufacturers are still emptying barrels and drums by hand, this back breaking work is labour intensive and unproductive. Graco container evacuation systems (drum unloaders) solve this problem. They are designed with numerous built-in features to protect foods from contamination. Graco's piston pumps are built with sanitary flanges, quick knockdown connections and a FDA-compliant air motor shroud, making cleaning and sanitization an easy process. The unloading systems are equipped with a pump ram with follower plate and inflatable seal protecting ingredients from external contamination and bacteria, leading to safer operations over dumping and scooping.

Graco seals inflate to conform to the container type and shape, providing evacuation rates up to 99% by cleanly wiping down the container's sides. The inflating seals are capable of accommodating ribs and slightly tapered barrels designs.

Contact Pump & Machinery for more details

An air operated diaphragm pump (also known as AODD pump or membrane pump) is a type of positive displacement pump that uses compressed air as a power source. The compressed air is shifted from one chamber to the other by a linked shaft that allows the chambers to move simultaneously. This back-and-forth motion, forces liquid out of one chamber and into the outlet manifold, while filling the opposite fluid chamber via the inlet manifold. Upon changeover, the fluid section that was filled on the previous shift empties into the outlet manifold and the fills the opposite chamber via the inlet manifold. The rapid changeover allows for reduced pulsation at the outlet.

WETTED COMPONENT OPTIONS

• Acetal
• Kynar
• Polypropylene

CENTER SECTION

• Polypropylene

• Santoprene
• PTFE

DIAPHRAGM OPTIONS

• Supply pump for OEM applications
• Printing ink supply
• Chemical supply for wastewater and sanitary applications
• Plating/surface finishing
• Chemical dosing
• Car wash chemicals
• Laundry chemicals and detergents (hotel/resorts)

‍

Graco's powerful line of piston pumps move extremely difficult materials when other pump cannot. SaniForce piston pumps can offer fluid pressures up to 1,200 psi (83 bar) handling even the toughest materials. Designed for industrial or hygienic applications, Graco has a pump to suit your application.

Wilden’s accessory products offer flexibility and value to your liquid process and expand the application range of Wilden pumps by complimenting the performance and specification of your pump. Wilden electronic controllers automate your Wilden pump for batching, and other electronically controlled dispensing applications and processes. By eliminating pump pulsation we can also create laminar process flow, or control the liquid level within a system or process.

DA GLOBAL features thousands of after-market parts IN STOCK in our California-based, 15,000 sq. ft. facility. We specialize in after-market parts for WILDEN®, WARREN RUPP® and ARO®, among others. Large tooling investments allow us to bring forth hundreds of new parts every 6 months, making NOMAD the undisputed leader in its industry.

Air diaphragm pumps are widely used in a variety of applications due to their versatility. Air operated double diaphragm pumps feature few moving parts, with no motor, base plate or other peripherals required. The design style, coupled with its positive displacement functionality, allows for the transfer of shear sensitive products with self-priming up to 25 feet. Air diaphragm pumps feature low initial investment as well as low replacement costs for wear parts when compared to other pump types.

Atex options are available

‍

Koflo Corporation was founded in 1983 with the intent of offering the highest quality static mixers at competitive prices and a family-oriented commitment to customer service and satisfaction. Made in the US of A, the koflo team pride themselves on service and quality. Through a constant dedication to these principles for over twenty-five years, Koflo has become a leader in the global static mixer industry.

In November of 1990, Koflo constructed its current manufacturing facility in Cary, Illinois, a far northwest suburb of Chicago. This unique location has afforded Koflo the ability to attract employees with a strong work ethic, and at the same time utilize the vast wealth of resources available from nearby Chicago.

In the ensuing years many changes have taken place within the industrial marketplace. One major change was the requirement of "just in time" delivery. In response to this change, Koflo increased inventory levels of both standard OEM mixers and individual mixer components. An inventory program was also created for a majority of our OEM customers with specific mixer needs.

For chemical injection Koflo specify injection quills based on application.

There are many different applications for static mixers such as: water, dosing, chemicals, petroleum, food and beverage, pharmaceutical, waste water, gases, etc.

Before we can select the right mixer we will need to understand your application and in particular: flow, pressure, viscosity, blend ratio, temperature, hygiene requirements, pipework and flange requirements, etc. Give the Pump & machinery team a call and we will do our best to help.

‍

The Sulzer range of single-stage pumps and 2 stage pumps can be designed either using the end suction overhang impeller design method, or the impeller between bearing design method. These pumps comply with either ISO 5199 / ISO 2858, ASME B73.1 or API 610 standards and guarantee reliable pumping processes.

‍

‍

‍

Rotary lobe pumps are equally suitable for low and high-viscous media. Due to their large free ball passage and low rotational speed they are relatively tolerant to blockage and solid materials in the medium. Varying solid content and thereby caused pressure variations are no factor to the flow. Their performance capacity is higher than that of many other positive displacement pumps of the same type. As energy is the most decisive factor of life cycle costs this is one of the most important benefits of this pump technology.

‍

Air operated double diaphragm pumps are widely used in a variety of applications due to their versatility. AODDP's feature few moving parts, with no motor, base plate or other peripherals required. The design style, coupled with its positive displacement functionality, allows for the transfer of shear sensitive products with self-priming up to 25 feet. Air diaphragm pumps feature low initial investment as well as low replacement costs for wear parts when compared to other pump types.

Advantages of AODD pumps can include:

• Chemical compatibility
• Self priming
• Ability to dead head
• Variable speed
• High viscosity
• High pressure
• High temperature
• Large particle size
• Portability

Fill-Rite Fuel Transfer Pumps are manufactured by Tuthill Pumps. Options for this rugged, reliable range of pumps include AC, DC and hand operated pumps for stationary and mobile fuel transfer applications

Fill Rite AC Series heavy duty  pumps offer all-cast-iron construction, thermal protection, and wide range of fuel-delivery rates and features that provide accuracy, durability, and reliability.  Whether your fueling bulldozers, graders, trucks or combines, the performance , feature and capabilities of the AC Services pumps provide quick fill rates with a dependability you've come to expect

Fill-Rite Fuel Transfer Pumps are manufactured by Tuthill Pumps. Options for this rugged, reliable range of pumps include AC, DC and hand operated pumps for stationary and mobile fuel transfer applications.

Tough,Reliable,Long-Lasting. Fill-Rite hand pumps deliver fluids quickly and easily.Whether your transferring gasoline,oil or diesel,select from a variety of Fill-Rite hand Pumps.

‍

Fill-Rite Fuel Transfer Pumps are manufactured by Tuthill Pumps. Options for this rugged, reliable range of pumps include AC, DC and hand operated pumps for stationary and mobile fuel transfer applications.

Fill-Rite's line of 4 wheel mechanical flow meters are designed to meet the stringent demands of customers who need to monitor fuel usage accurately and dependability.  Rugged construction, easy to read numbers, and the flexibility of horizontal or vertical positioning are just three features of these superior meters.  Plus, all can be field calibrated for the utmost accuracy, regardless of fluid.

‍

Macnaught Pty Ltd is a leading designer and manufacturer of quality lubrication and fluid transfer equipment into markets such as agriculture, automotive, mining, aviation, industrial and marine. Macnaught is also globally renowned for the manufacture of high quality, oval-gear, positive displacement flowmeters that are known for their reliability, durability and overall design excellence.

Macnaught Pty Ltd, a privately owned company established in 1948, has been designing and manufacturing premium quality fluid measurement, fluid transfer and lubrication equipment for the agricultural, automotive, industrial, mining and transport industries across the globe for over six decades. 

Leaders in our field, we design and manufacture world-class products with a commitment to excellence as one of our main goals. 

We maintain our leading position in the market through strategic distributorships, innovative design, technical expertise and dedicated people. 

Macnaught continues to lead the market by providing its strategic partners with superior product options and quality service to ensure ongoing loyalty. We value the relationships we maintain in the industry and are committed to ensuring we continue to add value to the businesses we serve.

Through enhanced R&D, manufacturing, warehousing, sourcing and distribution capabilities, as well as the ongoing design and development of new products, Macnaught is well positioned for substantial growth and maintaining our leading position in the market.

Macnaught's mission is to always exceed industry standards with its products and services.

‍

‍