Applications

Adhesives

Carver GH End-Suction Centrifugal Pump

GH

Available as either a frame-mounted (GHF) or close-coupled (GHC) unit, the GH is based on the same product platform as our vertical pumps and shares many of the same parts.

For added simplicity, the entire series is covered by only three bearing frames and comes in whole pump or modular kit form. The GHC is fully compatible with standard, off-the-shelf NEMA JP and JM frame motors, and all models feature a back pull-out design and casings rotatable in 90° increments for different field piping orientations

Carver GH End-Suction Centrifugal Pump

Other common features for the GH include 316 SS shaft sleeves, keyed impellers to prevent accidental spin off, dynamic balancing to ISO G2.5 guidelines, and re re greaseable bearings secured with locking rings, as standard. These features combine to produce shaft deflection values so low that they exceed the requirements of ANSI B73.1M-1991 and overall, provide some of the most efficient hydraulics in the industry.

Options for the JP include replaceable wear rings, cartridge seals, and flush plans. Along with these, higher alloy material options such as Ni-Al-Br and CD4MCuN and a full range of motor and baseplate choices are also available.

Sharpe Mixers

Sharpe Mixers Clamp Mounted Direct Drive and Gear Drive Portable mixers

  • White powder-coated nosecone.
  • Single or dual hyflo impellers.
  • Shaft rpm is 1750
  • This mixer line has been refined and improved over the years to assure that every component has significant advantages over other mixers on the market.
  • From the nearly indestructible white powder-coated finish to the stainless-steel mounting clamp, from the vapor-tight coupling housing to the quality-10 gearing, you can be confident that your Sharpe Mixer will look and operate like new after years of duty.

Sharpe Mixers
Standard Industrial Motors

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line ofExplosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.

Lewa Process Pumps -Centrifugal

LEWA is known worldwide as a specialist and market leader in the handling of supercritical fluids and the use of diaphragm metering pumps, packed plunger metering pumps and process pumps.

LEWA pumps provide high metering accuracy and are durable, reliable, safe and highly efficient.

Lewa Process Pumps -Centrifugal

The Nikkiso Non-Seal centrifugal canned motor pump has been designed specifically for the chemical industry. There, it is used for metering critical fluids. To do this, the centrifugal pump is designed in accordance with API 685.

Resources
No items found.
Graco Process Pumps - Drum Unloaders

Many food manufacturers are still emptying barrels and drums by hand, this back breaking work is labour intensive and unproductive. Graco container evacuation systems (drum unloaders) solve this problem. They are designed with numerous built-in features to protect foods from contamination. Graco's piston pumps are built with sanitary flanges, quick knockdown connections and a FDA-compliant air motor shroud, making cleaning and sanitization an easy process. The unloading systems are equipped with a pump ram with follower plate and inflatable seal protecting ingredients from external contamination and bacteria, leading to safer operations over dumping and scooping.

Graco seals inflate to conform to the container type and shape, providing evacuation rates up to 99% by cleanly wiping down the container's sides. The inflating seals are capable of accommodating ribs and slightly tapered barrels designs.

Contact Pump & Machinery for more details

Graco Process Pumps - Drum Unloaders

There is no need to dilute materials with Graco's powerful bin and drum unloaders. Our pumps handle high viscosity materials such as peanut butter, frostings, toothpaste, corn syrup and heavy chocolate. (Viscosities up to 1,000,000 cps)

For system flexibility, you can configure our bin unloaders with either double ball or priming piston designs. Each is designed and built to fulfill your technical requirements.

Graco Process Pumps -Air Operated Diaphram Pumps

An air operated diaphragm pump (also known as AODD pump or membrane pump) is a type of positive displacement pump that uses compressed air as a power source. The compressed air is shifted from one chamber to the other by a linked shaft that allows the chambers to move simultaneously. This back-and-forth motion, forces liquid out of one chamber and into the outlet manifold, while filling the opposite fluid chamber via the inlet manifold. Upon changeover, the fluid section that was filled on the previous shift empties into the outlet manifold and the fills the opposite chamber via the inlet manifold. The rapid changeover allows for reduced pulsation at the outlet.

WETTED COMPONENT OPTIONS

  • Acetal
  • Kynar
  • Polypropylene

CENTER SECTION

  • Polypropylene
  • Santoprene
  • PTFE

DIAPHRAGM OPTIONS

  • Supply pump for OEM applications
  • Printing ink supply
  • Chemical supply for wastewater and sanitary applications
  • Plating/surface finishing
  • Chemical dosing
  • Car wash chemicals
  • Laundry chemicals and detergents (hotel/resorts)

Graco Process Pumps -Air Operated Diaphram Pumps

Designed with fewer parts than competitive pumps, Graco’s air operated double diaphragm pumps features our stall-free, low pulsation air valve, which is externally accessible—ensuring rapid changeovers and minimum downtimes.

Graco’s electric double diaphragm pumps (EODD) are ideal for applications that require low pulsation and a smooth flow. Our energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps.

Each pump is ruggedly constructed to resist corrosion and deliver a long, trouble-free product life.

The Graco diaphragm pumps come in a wide range of air operated and electric diaphragm pumps (ATEX models available). You can also choose from a extensive selection of materials to handle numerous applications, including corrosive and abrasive fluid transfer.

Graco Process Pumps-Industrial Peristaltic Pumps

Electric-powered hose pumps are ideal for use in industrial fluid transfer and metering applications. Abrasive, corrosive, shear sensitive, and gas-entrapped fluids can easily be pumped or dosed into your application. A broad set of benefits includes long hose life, numerous electric motor options and low operating costs.

Graco Process Pumps-Industrial Peristaltic Pumps

Expect a longer hose life with 360-degree single roller and only one hose compression per revolution, reducing hose wear significantly.Depending on your requirements, Graco’s industrial peristaltic pumps are available with AC and Brushless DC motor options, including motors for hazardous locations.

Our reciprocating positive displacement pumps are very inexpensive to maintain without valves, seals or glands, and easy access to maintenance point

  • Efficient Pumping Action – One hose compression per revolution extends hose life
  • Low Maintenance – No valves, seals or glands
  • Reversible – Pumps can be used to empty lines or clear blockages
  • Extended Hose Life – Only one hose compression per revolution

Resources
No items found.
Graco Process Pumps-Industrial Piston Pumps

Graco's powerful line of piston pumps move extremely difficult materials when other pump cannot. SaniForce piston pumps can offer fluid pressures up to 1,200 psi (83 bar) handling even the toughest materials. Designed for industrial or hygienic applications, Graco has a pump to suit your application.

Graco Process Pumps-Industrial Piston Pumps

Graco's powerful line of piston pumps move extremely difficult materials when others cannot. SaniForce piston pumps have fluid pressures up to 1,200 psi (83 bar) handling even the toughest materials.

Graco’s powerful line of piston pumps move difficult materials when others cannot. Fluid pressures of up to 1,200 psi (83 bar) are ideal for low to medium viscosity materials such as beverages, juices and sauces.

Quick knockdown lowers are made with corrosion resistant stainless steel and feature easy to clean sections, improving overall efficiency.

Resources
No items found.
Graco Process Pumps-Electric Diaphragm Pumps

Would you like to eliminate unnecessary pump failures for your application? Would you like to improve your facilities energy efficiency and create a quieter and cleaner work environment for your employees? Graco’s Husky e-Series pumps will help you achieve all of those items!

Graco Process Pumps-Electric Diaphragm Pumps
  • Only electric diaphragm pump on the market that will stall under pressure
  • Up to 80% more efficient than air operated diaphragm pumps
  • Reduce pulsation without the addition of pulsation dampeners
  • Patent pending technology allows pump to stall under pressure preventing pump failures from
    clogged lines or closed valves
  • Energy efficient electric drive reduces energy consumption up to 80% compared to traditional air
    operated diaphragm pumps
  • Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
  • Request a demo and see interactive information at www.graco.com/e-series

Resources
No items found.
March Chemical Pumps

March Manufacturing began in 1954 as a job shop performing precision machining for the aircraft industry.  In 1955, March developed its first pump for removing cooling coil condensation.  Our first magnetic drive pump came out in 1962.  In the late 60’s, March ceased operating in the aircraft industry to concentrate on pumps.

Originally located in Skokie, IL, a suburb of Chicago, March moved in 1968 to Glenview, IL to a larger building to better accomodate the increasing demand for sealless pumps.

The company was founded by William Zimmermann.  Since the beginning, March has been managed by the Zimmermann family, and  continues today.

March Chemical Pumps

Flows from 1/2 gpm to 200 gpm
Heads upto 160 feet
Availablein plasticand metallic construction
AC, DC, Explosion Proof,and Air Motors
Submersible and Non-Submersible

Nomad Diaphragm After-Market Pump Parts

DA GLOBAL features thousands of after-market parts IN STOCK in our California-based, 15,000 sq. ft. facility. We specialize in after-market parts for WILDEN®, WARREN RUPP® and ARO®, among others. Large tooling investments allow us to bring forth hundreds of new parts every 6 months, making NOMAD the undisputed leader in its industry.

Nomad Diaphragm After-Market Pump Parts

JDA GLOBAL LLC (est. 2011) serves as the world's largest & most experienced after-market diaphragm pump products provider. World class supply chain management, coupled with a proven track record in distribution development brings forth strong customer satisfaction. Linked with LOW COST, HIGH QUALITY products, rapid delivery and "easy to do business with" customer service, we strive for a "customer for life" strategy and fulfillment.

Resources
No items found.
Nomad Powerflo Metal Pumps

Air diaphragm pumps are widely used in a variety of applications due to their versatility. Air operated double diaphragm pumps feature few moving parts, with no motor, base plate or other peripherals required. The design style, coupled with its positive displacement functionality, allows for the transfer of shear sensitive products with self-priming up to 25 feet. Air diaphragm pumps feature low initial investment as well as low replacement costs for wear parts when compared to other pump types.

Atex options are available

Nomad Powerflo Metal Pumps

Nomad Diaphragm Pumps are interchangeable with their Wilden counterparts but are significantly more cost effective and excellent quality. This means that while being an extremely reliable alternative to Wilden, there is no need to spend time and money changing pipework in order to lock in the cost savings.

Backed by all American JDA Global you can find confidence in a five year limited warranty.

Nomad Diaphragm Pumps are available in four different body materials; aluminium, ductile iron, stainless steel and polypropylene with all major elastomers. They come in seven port sizes; 1/4", ½", 1", 1 ½" ", 2" 3" and 4". All are capable of self priming, dry running, solids handling and high pressures.

Sold worldwide, these pumps are suitable for a full spectrum of applications from mining and construction, oil, ceramic, resin and chemical transfer to sanitary such as food & beverage. AODD pumps are particularly suitable for pumping chemicals, petroleum, foods, beverage, cleaning solutions, slurry, waste water, adhesives, pharmaceuticals and higher viscosity fluids.

Nomad Transgold Metal Pumps

The TRANS-FLO gold product line features a rugged anodized aluminum piston-style air valve system, capable of functioning in the harshest compressed air conditions, emphasis on mining, construction and utilitarian applications. The TRANS-FLO GOLD system also features the fewest moving parts in the diaphragm pump business, allowing for ease of maintenance, assembly and disassembly.

Nomad Transgold Metal Pumps

NOMAD features diaphragm pumps in 7 sizes (1/4", ½" 1", 1.5", 2" 3" and 4") and 4 body materials (aluminum, ductile, stainless steel and polypropylene). All major elastomer options are available. With our simple proven design, NOMAD diaphragm pumps are versatile and can handle the toughest applications, from mining and construction to oil, ceramic, resin and chemical transfer.

Resources
No items found.
Netzsch Drum Unloaders

NEMO® Barrel Emptying Pumps suction themselves automatically to the bottom of the barrel or container to achieve almost residue-free emptying in the chemical, pharmaceutical and foods industries. The heart of the Barrel Emptying System is a volumetrically conveying NEMO® Progressing Cavity Pump. When the NEMO® Pump is started, a vacuum is created under the follower plate. This then simultaneously puts slight pressure on the substance in order to guarantee constant suction in the pump.

Features of NEMO® Barrel Emptying Pumps:

  • very gentle conveyance
  • nearly residual-free emptying
  • conveyance also of compacted products
  • conveyance of solids

NEMO® Barrel Emptying Pumps offer you:

  • conveyance volume in proportion to rotation speed
  • constant low-pulsation conveyance
  • high efficiency
  • low life cycle costs combined with easy serviceability

Everything from a single supplier!
Our broad product portfolio makes it possible for us to design complete dosing systems for you. Take advantage of our many years of experience and know-how.

Netzsch Drum Unloaders

NEMO® Barrel Emptying Pumps

Universally applicable – The NEMO® Barrel Emptying Pump empties nearly any container!

Wide Spectrum of Applications
The NEMO® Barrel Emptying Pump is used primarily for substances with the following properties…

  • low to high viscosity
  • dilatant, thixotropic or structurally viscous
  • highly filled
  • shear-sensitive and pressure-sensitive
  • highly abrasive
  • smearing or non-smearing
  • sticky or gel-like
  • heated or unheated

…such as

  • RTV silicones
  • 1K and 2K epoxies
  • PUR sealing compounds
  • petroleum jelly
  • various fats
  • fruit concentrates
  • doughs

Additional Features of the NEMO® Barrel Emptying Pump

  • nearly shear-free conveyance of highly viscous, highly abrasive or highly filled substances
  • continuous or intermittent emptying
  • clean emptying, residue of less than 1-2%
  • no hiatus
  • very gentle, low-pulsation conveyance
  • very little pressure on the follower plate
  • emptying of conical barrels
  • low pressure conditions in the system
  • capacity is infinitely adjustable by means of the rotation of the motor
  • dosing directly from the barrel

Large Range of Capacities

  • flow rates of approx. 2 l/h to approx. 5000 l/h