Industry

Marine

Marine

As an island, nation, the marine environment is closely linked to New Zealand’s society and economy. Almost all of our imports and exports, both by value and volume, are imported via sea freight. The majority of oil and gas reserves are located offshore. New Zealand and the South Pacific have a significant fishing industry, and for many New Zealanders the marine environment is a place of relaxation and recreation. Pumps widely used across the marine industry include:

  • Graco (credit for photo)
  • Wilden,
  • Nomad,
  • Netzsch,
  • Corken,
  • Tuthill,
  • Blackmer,
  • March
  • LC (liquid controls)
  • Blacoh
Carver GH End-Suction Centrifugal Pump

GH

Available as either a frame-mounted (GHF) or close-coupled (GHC) unit, the GH is based on the same product platform as our vertical pumps and shares many of the same parts.

For added simplicity, the entire series is covered by only three bearing frames and comes in whole pump or modular kit form. The GHC is fully compatible with standard, off-the-shelf NEMA JP and JM frame motors, and all models feature a back pull-out design and casings rotatable in 90° increments for different field piping orientations

Carver GH End-Suction Centrifugal Pump

Other common features for the GH include 316 SS shaft sleeves, keyed impellers to prevent accidental spin off, dynamic balancing to ISO G2.5 guidelines, and re re greaseable bearings secured with locking rings, as standard. These features combine to produce shaft deflection values so low that they exceed the requirements of ANSI B73.1M-1991 and overall, provide some of the most efficient hydraulics in the industry.

Options for the JP include replaceable wear rings, cartridge seals, and flush plans. Along with these, higher alloy material options such as Ni-Al-Br and CD4MCuN and a full range of motor and baseplate choices are also available.

Carver Pump Ltd RS Multistage,Ring Section Pump

Multistage, Ring Section Pump

Our process duty, horizontal ring section multistage pump. Designed for moderate to high-pressure pumping, the RS is available in seven basic sizes with overall performance to 2,600 HP.

Carver Pump Ltd RS Multistage,Ring Section Pump

For Pressures to 1,500 PSI

The RS is offered with Class 300 ANSI R.F. inlet flanges and Class 600 or 900 ANSI R.F. discharge flanges, depending on the pressures and number of stages involved. Hydraulic performance extends to 2,000 GPM and 3,400 ft. TDH, making it ideally suited for the most demanding industrial and process applications.

The RS design incorporates a product-lubricated, advanced composite material, sleeve-type radial bearing at the outboard (discharge) end. The thrust bearings are two matched angular contact ball bearings located at the inboard (suction) end of the pump. An optional outboard mechanical seal with an inboard radial ball bearing is also available. The RS has oil-lubricated ball bearings, which can be water cooled. Larger units can also be fan cooled.

The available materials of construction, from ductile iron to duplex stainless steel, offer combinations suitable for all applications from general water services to light abrasives and corrosive applications. Our proprietary advanced composite material, available for wear rings and interstage bushings, offers high-temperature performance, and exceptional resistance to wear and corrosion.

Grundfos Dosing pumps

Grundfos offers a wide range of dosing pumps representing state-of-the-art technology.

Digital Dosing solutions (SMART Digital, DME, DDI) set new standards in liquid chemical handling and accuracy. The operator can easily install and set up the pump to discharge exactly the quantity of dosing liquid required for the process in a unique drive- and flow-control management concept. The setting of the pump is displayed in ml/h, l/h or gph, and the operation mode is easily identified by means of icons.

The DMH mechanical hydraulic dosing pump range is the preferred choice for industrial and complex tasks. The DMH range is a series of extremely strong, robust pumps for applications where a substantial dosing range and high-pressure capabilities are required

Grundfos Dosing pumps

Applications

The dosing pumps are designed for handling chemicals within the following applications, among others:

  • Drinking water treatment
  • Wastewater treatment
  • Cooling water treatment
  • Washing systems
  • Process water treatment
  • Chemical industry.

Features and benefits

  • Precise and easy setting
  • Unique technology
  • Small number of variants will cover all needs
  • Full pulse control
  • Pulse batch control
  • Internal timer batch control
  • Analog 0/4-20 mA control
  • Level control
  • Fieldbus communication module.

Liquid Controls LCR iQ

The future of electronic registers has arrive, and it is the LC (Liquid Controls) LCR iQ. At the center of the CENTRILOGiQ® platform is the LCR.iQ®, built from the ground up by Liquid Controls' Research & Development team and in close collaboration with customers who will benefit from it! Ease of use, process configurability, and data security were the highest priorities in the design and foundation of the LCR.iQ®.

The LCR iQ replaces the Pump & Machinery Selectronic register which has served the NZ tanker industry well for 40 plus years.

Liquid Controls LCR iQ

LCR iQ Features

User Input & Display

  • Large 7" high definition, full color video display - High clarity and easy visibility
  • Customizable home screen and delivery setup prompts - Streamline driver interface
  • Full alpha-numeric keypad and arrow selection keys - Quick, intuitive navigation
  • Instant on-board diagnostics and help screens - Quickly troubleshoot & resolve issues to minimize downtime
  • Full screen active delivery mode - Largest readable digits in the industry, viewable from up to 100'
  • Day/night mode and brightness adjustment - Operator can select preferred viewing mode for conditions
  • Customizable printed tickets - Easily tailor ticket formats without software updates
  • Transaction history logs store 10,000+ records - No more lost tickets; Easily access and print historical tickets
  • Weights & measures historical audit log and event log - Search and download by date range or field
  • Large LED back lit keypad - Easy to operate with gloved hands, easy to read in daylight or at night
  • Remote control (E-Stop) compatible to third party systems - Seamless retrofit into existing systems
  • 3rd party fleet automation connectivity and data management - Seamless retrofit into existing systems
  • Toggle flow - Optimizes fuel flow rate without driver intervention in refined fuels delivery systems
  • Wireless Printing - Operator can print from hand-held remote printer
  • Connectable with hand held devices, etc via wifi and Bluetooth.
  • Standard meter mount base - Drop-in retrofit for all conventionally mounted registers
  • Panel mount enclosure option - For remote panel mounting of LCR.iQ®
  • Preset delivery by volume or weight - Provides highest accuracy of fuel delivery to prevent over-fueling
  • 4-Bolt even seal o-ring design - Water-tight, weather-proof seal protects internal components
  • Die-cast aluminum housing - Chromate and powder coated for long term corrosion resistance.11 Conduit Ports (1/2" NPT) - To accommodate many I/O and control optionsMulti-point calibration up to 16 points - Maximize accuracy over entire flow range
  • Internal telescoping hinges - Eliminates seizing and corrosion of external door hinges
  • Serial accessibility to LCP data communication protocol - Compatible with major in-cab/back office systems
  • Electronic temperature volume compensation - Available with optional probe and thermowell kit
  • Waterproof, corrosion resistant and dust-proof - meets IP66 and UL Type 4X requirements
Aussie QP Engine Driven Trash / Fire Pumps

Heavy Duty fully transportable engine driven pumps for a wide range of applications. QP Aussie pumps are designed for local conditions and the range is extensive enough to cover applications.

Fire Fighting Pumps - Designed to out-perform and out-feature all other portable firefighting pumps, the Aussie Fire Chief is the flagship of the Aussie series. The range includes 2” and 3” fire fighting pumps delivers flows to 510 lpm (litres per minute) and heads to 98 metres.

Trash Pumps - Rugged trash pumps in 2”, 3” and 4” with flows to 1800 lpm, heads to 27 metres and suction lift to 7.6 metres. The pumps feature a big front mounted 'cleanout' port and high SG, cast iron, non clog style, open impeller and volute system designed to pump solids in suspension and resist wear.

Transfer Pumps - Aussie gushers (transfer pumps) are available in a range of sizes from 2” to a massive 6″ inlet/outlet. Designed to be ultra reliable, these pumps have applications in the transfer of high volumes of liquid at relatively low pressures. Flows of up to 2900 lpm, (QP602) with heads of up to 33 metres.

Aussie QP Engine Driven Trash / Fire Pumps
  • Construction site dewatering
  • Waste water handling
  • Effluent pump out
  • Livestock waste water disposal
  • Solid laden mine waste pump out
  • Fire fighting pumps, mop up & fire protection
  • High pressure water transfer
  • Spray irrigation
  • Diesel fuel transfer
  • High pressure spraying
  • Boom spraying
  • Wash down
  • High volume water transfer
  • Fast fill tanker applications
  • Flood irrigation
  • Construction site dewatering

SPX Heat Exchangers

Pump & Machinery are proud to be SPX distributors for service and sales. In New Zealand and the South Pacific Islands the applications for industrial heat exchangers calls for a wide and deep range of products, putting great demand on the equipment. SPX FLOW's portfolio of APV ParaFlow is designed to match our industries needs, whether this is for very small flows, or the extra-large kind, up to 4500 m³/h. With the SPX selection of materials, connections and accessories, we can supply equipment for practically every heat transfer need. Additionally our long experience in after sales services, SPX FLOW and Pump & Machinery are your all-round partner for heat transfer.

The range includes: NR5 Plate Heat Exchangers, LEO Plate Heat Exchangers, ER5 Plate Heat Exchangers, VEGA Plate Heat Exchangers, PHE, PMC, Paraweld, Orion, Zephyr, Duraflow, Sirius, HE Capella.

SPX Heat Exchangers
  • Cooling, heating, condensing and evaporation
  • Plate type - gaskets, semi welded and welded plate
  • Tubular
  • Hygienic
  • Energy efficient
  • Up to 4500m³/hr
  • Service, maintenance and repair
  • Genuine original SPX spares
  • High temperature and pressure
  • -200°C to 400°C
  • 0 to 100 bar (gauge)
  • CIP
Tuthill Lubrication Pumps

Lubrication & Circulation Pumps

Tuthill lubrication pumps handle a wide range of viscosities and sustain a constant flow at any pressure.

Tuthill Lubrication Pumps

The 1000 Series is based on the proven internal gear principal and is enhanced in response from our OEM customers for a pump that offers advanced features which make installation easier. These side-ported pumps have the option to bolt SAE/DIN flanges onto them ensuring maximum flexibility on the porting arrangements. Our pump meets your technical requirements and is easily fitted into your system. Our manufacturing expertise and knowledge of applications enable us to provide you with an engineered solution and ensure satisfaction with post-sales service. We pride ourselves on properly servicing you with specification, installation, operation, and troubleshooting.  The pump was originally designed to meet and exceed the exacting requirements of the refrigeration compressor market.

Resources
No items found.
Sharpe Mixers

Sharpe Mixers Clamp Mounted Direct Drive and Gear Drive Portable mixers

  • White powder-coated nosecone.
  • Single or dual hyflo impellers.
  • Shaft rpm is 1750
  • This mixer line has been refined and improved over the years to assure that every component has significant advantages over other mixers on the market.
  • From the nearly indestructible white powder-coated finish to the stainless-steel mounting clamp, from the vapor-tight coupling housing to the quality-10 gearing, you can be confident that your Sharpe Mixer will look and operate like new after years of duty.

Standard Metering Pumps

Standard Metering Pumps are engineered to safely measure and dispense preset batches of product from drums and tanks. The unique design eliminates the need for scales and pails as product can be metered directly out of your source vessel. Available in both Industrial and Sanitary configurations.

Standard Metering Pumps

Engineered to control, measure and dispense preset volumes of liquid from drums, IBC’s, plating tanks or any large storage vessel. The air systems are ideal for high frequency, continuous duty applications. The BCS can be used in an industry where batching, chemical packaging or dilution is required to be accurate and efficient. Simply dial in the desired volume, press ENTER and the BCS delivers a preset volume of liquid virtually hands-free.

Applications

  • Chemical Packaging
  • Water Treatment Chemicals
  • Chemistry For Plating Tanks
  • Chemical Delivery

Features

  • Turbine Paddle Wheel Design
  • Measures: Gallons, Liters, Cubic Meters
  • Resettable Totalizer
  • User Friendly “In Field” Calibration
  • 7 Pre-Set Batches
  • PP & PVDF Materials of Construction
  • Relay Output Signal

Resources
No items found.
Standard Industrial Motors

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line ofExplosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.

Standard Industrial Pump Tubes

Our complete range of pump tubes provide an ideal solution for applications ranging from corrosive chemicals to light oils. Pump tubes are available in Polypropylene, PVDF, CPVC, Stainless Steeland Aluminum.

Resources
No items found.
Standard 3A Certified Pumps

Our 3A Sanitary Pumps are a hygienic solution specifically designed for the dairy process industry. The 3A pumps feature over-molded diaphragms and a swivel stand.

Standard 3A Certified Pumps

Our 3A Sanitary Pumps are a hygienic solution specifically designed for the dairy process industry. The 3A pumps feature over-molded diaphragms and a swivel stand.

Sizes from 40mm to 100mm pumps,Ideal for Poultry,Large Solids, a very versatile pump for the Food Processing Industry.

Resources
No items found.
Blackmer-Screw Pumps

Blackmer® S Series screw pumps are self-priming, double-ended, positive displacement pumps that offer outstanding performance in the most demanding applications regardless of temperature, viscosity or pressure. The twin and triple screw designs provide complete axial balancing of the rotating screws and their timing technologies eliminate metal-to-metal contact within the pump.

Blackmer-Screw Pumps

Blackmer S Series pumps are available in four distinct lines, each having multiple model configurations and sizes: twin screw (WTG), twin screw with non-timing gear (NTG), multi-phase twin screw, and triple screw. Other features of Blackmer S Series pumps include compact design, ability to run dry for short periods, high suction lift and constant flow rates despite varying conditions. They are low noise and nearly pulsation-free with little fluid agitation, making them ideal for use with corrosive and non-corrosive, low or high viscosity, and clean or abrasive liquids.

Blackmer Centrifugal Pumps

The System One Centrifugal Pumps are designed specifically to operate in severe process industry applications, and contain oversized bearings to offer greater load capacity and extended bearing life. These pumps increase productivity, while offering maximum reliability in the toughest of applications, such as mining de-watering, chemical process and water/wastewater treatment.

Blackmer Centrifugal Pumps

The simplest type of centrifugal pump is the single stage machine that consists fundamentally of a rotating element, called an impeller, and a casing. Liquid is led to the eye or center of the impeller and is set into rotation by the impeller vanes. By virtue of centrifugal force the liquid is thrown from the rim or periphery of the impeller with a considerable velocity and pressure. The casing, which closely surrounds the impeller, has a volute shaped passage of increasing area, which collects the liquid leaving the impeller, and converts a portion of its velocity energy into additional pressure energy. This casing passage leads to the discharge nozzle of the pump where it is forced into the discharge piping.

Resources
No items found.