Applications

Sewage

Aussie QP Engine Driven Trash / Fire Pumps

Heavy Duty fully transportable engine driven pumps for a wide range of applications. QP Aussie pumps are designed for local conditions and the range is extensive enough to cover applications.

Fire Fighting Pumps - Designed to out-perform and out-feature all other portable firefighting pumps, the Aussie Fire Chief is the flagship of the Aussie series. The range includes 2” and 3” fire fighting pumps delivers flows to 510 lpm (litres per minute) and heads to 98 metres.

Trash Pumps - Rugged trash pumps in 2”, 3” and 4” with flows to 1800 lpm, heads to 27 metres and suction lift to 7.6 metres. The pumps feature a big front mounted 'cleanout' port and high SG, cast iron, non clog style, open impeller and volute system designed to pump solids in suspension and resist wear.

Transfer Pumps - Aussie gushers (transfer pumps) are available in a range of sizes from 2” to a massive 6″ inlet/outlet. Designed to be ultra reliable, these pumps have applications in the transfer of high volumes of liquid at relatively low pressures. Flows of up to 2900 lpm, (QP602) with heads of up to 33 metres.

Aussie QP Engine Driven Trash / Fire Pumps
  • Construction site dewatering
  • Waste water handling
  • Effluent pump out
  • Livestock waste water disposal
  • Solid laden mine waste pump out
  • Fire fighting pumps, mop up & fire protection
  • High pressure water transfer
  • Spray irrigation
  • Diesel fuel transfer
  • High pressure spraying
  • Boom spraying
  • Wash down
  • High volume water transfer
  • Fast fill tanker applications
  • Flood irrigation
  • Construction site dewatering

Sharpe Mixers

Sharpe Mixers Clamp Mounted Direct Drive and Gear Drive Portable mixers

  • White powder-coated nosecone.
  • Single or dual hyflo impellers.
  • Shaft rpm is 1750
  • This mixer line has been refined and improved over the years to assure that every component has significant advantages over other mixers on the market.
  • From the nearly indestructible white powder-coated finish to the stainless-steel mounting clamp, from the vapor-tight coupling housing to the quality-10 gearing, you can be confident that your Sharpe Mixer will look and operate like new after years of duty.

Sharpe Mixers
Graco Process Pumps -Air Operated Diaphram Pumps

An air operated diaphragm pump (also known as AODD pump or membrane pump) is a type of positive displacement pump that uses compressed air as a power source. The compressed air is shifted from one chamber to the other by a linked shaft that allows the chambers to move simultaneously. This back-and-forth motion, forces liquid out of one chamber and into the outlet manifold, while filling the opposite fluid chamber via the inlet manifold. Upon changeover, the fluid section that was filled on the previous shift empties into the outlet manifold and the fills the opposite chamber via the inlet manifold. The rapid changeover allows for reduced pulsation at the outlet.

WETTED COMPONENT OPTIONS

  • Acetal
  • Kynar
  • Polypropylene

CENTER SECTION

  • Polypropylene
  • Santoprene
  • PTFE

DIAPHRAGM OPTIONS

  • Supply pump for OEM applications
  • Printing ink supply
  • Chemical supply for wastewater and sanitary applications
  • Plating/surface finishing
  • Chemical dosing
  • Car wash chemicals
  • Laundry chemicals and detergents (hotel/resorts)

Graco Process Pumps -Air Operated Diaphram Pumps

Designed with fewer parts than competitive pumps, Graco’s air operated double diaphragm pumps features our stall-free, low pulsation air valve, which is externally accessible—ensuring rapid changeovers and minimum downtimes.

Graco’s electric double diaphragm pumps (EODD) are ideal for applications that require low pulsation and a smooth flow. Our energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps.

Each pump is ruggedly constructed to resist corrosion and deliver a long, trouble-free product life.

The Graco diaphragm pumps come in a wide range of air operated and electric diaphragm pumps (ATEX models available). You can also choose from a extensive selection of materials to handle numerous applications, including corrosive and abrasive fluid transfer.

Nomad Diaphragm After-Market Pump Parts

DA GLOBAL features thousands of after-market parts IN STOCK in our California-based, 15,000 sq. ft. facility. We specialize in after-market parts for WILDEN®, WARREN RUPP® and ARO®, among others. Large tooling investments allow us to bring forth hundreds of new parts every 6 months, making NOMAD the undisputed leader in its industry.

Nomad Diaphragm After-Market Pump Parts

JDA GLOBAL LLC (est. 2011) serves as the world's largest & most experienced after-market diaphragm pump products provider. World class supply chain management, coupled with a proven track record in distribution development brings forth strong customer satisfaction. Linked with LOW COST, HIGH QUALITY products, rapid delivery and "easy to do business with" customer service, we strive for a "customer for life" strategy and fulfillment.

Resources
No items found.
Nomad Pumps AODDP

Air diaphragm pumps are widely used in a variety of applications due to their versatility. AODDP's feature few moving parts, with no motor, base plate or other peripherals required. The design style, coupled with its positive displacement functionality, allows for the transfer of shear sensitive products with self-priming up to 25 feet. Air diaphragm pumps feature low initial investment as well as low replacement costs for wear parts when compared to other pump types.

Nomad Pumps AODDP

NOMAD features diaphragm pumps in 7 sizes (1/4", ½" 1", 1.5", 2" 3" and 4") and 4 body materials (aluminum, ductile, stainless steel and polypropylene). All major elastomer options are available. With our simple proven design, NOMAD diaphragm pumps are versatile and can handle the toughest applications, from mining and construction to oil, ceramic, resin and chemical transfer.

Resources
No items found.
All-Flo Metal Air Operated Diaphragm Pumps
All-Flo's stall-free metal pumps are available in a variety of sizes and have several material options for the pump body and elastomers, so they can be used in many different industrial, food, chemical and mining applications. The bolted design provides leak free operation and the thermoplastic diaphragms have an extended operational life, thereby minimizing operational costs and production downtime.
All-Flo Metal Air Operated Diaphragm Pumps
  • Port Size: 12mm to 76mm. (½" to 3")
  • Max. Flow Rate: 965 l/m
  • Max. Discharge Pressure: 8.2 bar
  • Max. Fluid Temperature: 100°C
  • Construction Materials: Body - Aluminium, stainless steel. Elastomers - Geolast ®, Nitrile, EPDM, Viton®, Santoprene®, PTFE, Urethane.
  • Applications: Suitable for applications within the Chemical, Paints & Inks, Plating & Finishing, Pulp & Paper, Oil & Gas and Waste Treatment industries.
Resources
No items found.
All-Flo Plastic Air Operated Diaphragm Pumps
All-Flo's stall-free plastic pumps are available in a variety of sizes and have several material options for the pump body and elastomers, so they can be used in many different applications. The bolted design provides leak free operation and the thermoplastic diaphragms have an extended operational life, thereby minimizing operational costs and production downtime.
All-Flo Plastic Air Operated Diaphragm Pumps
  • Port Size: 6mm to 50mm (¼" to 2")
  • Max. Flow Rate: 681 l/m
  • Max. Discharge Pressure: 8.2 bar
  • Max. Fluid Temperature: 93°C
  • Construction Materials: Body - Polypropylene, PVDF, Nylon. Elastomers - Nitrile, EPDM, PTFE, Viton®, Geolast®, Santoprene®.
  • Applications: Suitable for applications within the Chemical, Paints & Inks, Plating & Finishing, Pulp & Paper, Oil & Gas, Waste Treatment and Semiconductor industries.
Resources
No items found.
Truflo ANSI Process Pumps - End Suction
Truflo's DAP series of pumps are built to the ANSI B73.1M specifications to accommodate the very corrosive and erosive conditions of the chemical process industry. The DAP's durability, easy maintenance, and excellent interchangeability make it a great solution for process industry applications. 25 sizes are available.
Truflo ANSI Process Pumps - End Suction
  • Port Size: 25mm to 200mm
  • Max. Flow Rate: 21,000 l/m
  • Max. Discharge Pressure: 20 bar
  • Max. Fluid Temperature: 370ºC
  • Construction Materials: Ductile Iron, WCB (cast steel) Stainless Steel, CF8M, CN7M, CD4MCu, Hastelloy B, C & TI.
  • Applications: Suitable for waste treatment, water treatment, food processing, chemical processing, pulp and paper, oil and gas, breweries, power generation, steel.
Resources
No items found.
Truflo ANSI Process Pumps - Self Priming
Truflo's DSP Series of self-priming pumps are built to the ANSI B73.1M specifications with 8 sizes available. The DSP series is Interchangeable with the DAP series, except for the casing.
Truflo ANSI Process Pumps - Self Priming
  • Port Size: 25mm to 150mm
  • Max. Flow Rate: 4660 l/m
  • Max. Suction Lift: 6 metres
  • Max. Fluid Temperature: 370°C
  • Construction Materials: Ductile Iron, WCB, CD4MCu, Stainless Steel, Hastelloy B & C.
  • Applications: Mill sump service, wastewater pond service w/portable design, unloading service, dikes and containment areas, bulk tank farms top unloading, manhole pumpage systems.
Resources
No items found.
All Prime Self-Priming Centrifugal Pumps

Pump & Machinery Co Ltd is distributing All Prime pumps to many different waste water industries. They are high quality Solids-Handling Self-Priming Centrifugal Pumps that perform to very high standards. The All Prime Pumps range is very competitively priced and has rapidly gained market share in the USA and other parts of the world.

The All Prime pump range has been readily accepted in New Zealand, as it has been in the USA and other parts of the world, where it is considered a cost effective, quality pump achieving high standards of performance.

All Prime Self-Priming Centrifugal Pumps
    These pumps are designed for Industrial and agricultural tasks.They are fitted with a heavy duty TEFC single or three phase IP.Benefits:1. Long Trouble free life2.Pumps small solids in suspension3.Ready to pump in minimum amount of time.4.Easy access to check valve for servicing5.Electric motor convenience with compact design for ease of installation.6.Motor can be easily removed for maintenance without disconnecting pipework from the pump7.Stable,easy to install8. Flexibility of handled liquids9. Sizes from 1" through to 4"

Resources
No items found.
GMP Self Priming Motor Driven Pumps
  • Port Size: 25mm to 100mm
  • Max. Flow Rate: 2600 l/m
  • Max. Discharge Pressure: 78 metres
  • Max. Fluid Temperature: 80ºC
  • Construction Materials: Cast Iron, Zinc Free Bronze, 316 Stainless Steel.
  • Applications: Suitable for waste water, sewage, solids laden liquids, dewatering, firefighting, chemicals and general industrial, marine, agricultural and farm applications.
Resources
No items found.
GMP Self Priming Bare Shaft Pumps

Heavy duty cast Ni Al bronze & cast 316 stainless steel, self priming, centrifugal electric drive pumps with high pressure and flows available in a range of sizes from 1” through to 4”.  

GMP Self Priming Bare Shaft Pumps

    These pumps are designed for Industrial and agricultural tasks.They are fitted with a heavy duty TEFC single or three phase IP.

    Benefits:
    1. Long Trouble free life
    2.Pumps small solids in suspension
    3.Ready to pump in minimum amount of time.
    4.Easy access to check valve for servicing
    5.Electric motor convenience with compact design for ease of installation.
    6.Motor can be easily removed for maintenance without disconnecting pipework from the pump
    7.Stable,easy to install
    8. Flexibility of handled liquids
    9. Sizes from 1" through to 4"

Resources
No items found.