Applications

Diesel

Carver Pump Ltd RS Multistage,Ring Section Pump

Multistage, Ring Section Pump

Our process duty, horizontal ring section multistage pump. Designed for moderate to high-pressure pumping, the RS is available in seven basic sizes with overall performance to 2,600 HP.

Carver Pump Ltd RS Multistage,Ring Section Pump

For Pressures to 1,500 PSI

The RS is offered with Class 300 ANSI R.F. inlet flanges and Class 600 or 900 ANSI R.F. discharge flanges, depending on the pressures and number of stages involved. Hydraulic performance extends to 2,000 GPM and 3,400 ft. TDH, making it ideally suited for the most demanding industrial and process applications.

The RS design incorporates a product-lubricated, advanced composite material, sleeve-type radial bearing at the outboard (discharge) end. The thrust bearings are two matched angular contact ball bearings located at the inboard (suction) end of the pump. An optional outboard mechanical seal with an inboard radial ball bearing is also available. The RS has oil-lubricated ball bearings, which can be water cooled. Larger units can also be fan cooled.

The available materials of construction, from ductile iron to duplex stainless steel, offer combinations suitable for all applications from general water services to light abrasives and corrosive applications. Our proprietary advanced composite material, available for wear rings and interstage bushings, offers high-temperature performance, and exceptional resistance to wear and corrosion.

Liquid Controls LCR iQ

The future of electronic registers has arrive, and it is the LC (Liquid Controls) LCR iQ. At the center of the CENTRILOGiQ® platform is the LCR.iQ®, built from the ground up by Liquid Controls' Research & Development team and in close collaboration with customers who will benefit from it! Ease of use, process configurability, and data security were the highest priorities in the design and foundation of the LCR.iQ®.

The LCR iQ replaces the Pump & Machinery Selectronic register which has served the NZ tanker industry well for 40 plus years.

Liquid Controls LCR iQ

LCR iQ Features

User Input & Display

  • Large 7" high definition, full color video display - High clarity and easy visibility
  • Customizable home screen and delivery setup prompts - Streamline driver interface
  • Full alpha-numeric keypad and arrow selection keys - Quick, intuitive navigation
  • Instant on-board diagnostics and help screens - Quickly troubleshoot & resolve issues to minimize downtime
  • Full screen active delivery mode - Largest readable digits in the industry, viewable from up to 100'
  • Day/night mode and brightness adjustment - Operator can select preferred viewing mode for conditions
  • Customizable printed tickets - Easily tailor ticket formats without software updates
  • Transaction history logs store 10,000+ records - No more lost tickets; Easily access and print historical tickets
  • Weights & measures historical audit log and event log - Search and download by date range or field
  • Large LED back lit keypad - Easy to operate with gloved hands, easy to read in daylight or at night
  • Remote control (E-Stop) compatible to third party systems - Seamless retrofit into existing systems
  • 3rd party fleet automation connectivity and data management - Seamless retrofit into existing systems
  • Toggle flow - Optimizes fuel flow rate without driver intervention in refined fuels delivery systems
  • Wireless Printing - Operator can print from hand-held remote printer
  • Connectable with hand held devices, etc via wifi and Bluetooth.
  • Standard meter mount base - Drop-in retrofit for all conventionally mounted registers
  • Panel mount enclosure option - For remote panel mounting of LCR.iQ®
  • Preset delivery by volume or weight - Provides highest accuracy of fuel delivery to prevent over-fueling
  • 4-Bolt even seal o-ring design - Water-tight, weather-proof seal protects internal components
  • Die-cast aluminum housing - Chromate and powder coated for long term corrosion resistance.11 Conduit Ports (1/2" NPT) - To accommodate many I/O and control optionsMulti-point calibration up to 16 points - Maximize accuracy over entire flow range
  • Internal telescoping hinges - Eliminates seizing and corrosion of external door hinges
  • Serial accessibility to LCP data communication protocol - Compatible with major in-cab/back office systems
  • Electronic temperature volume compensation - Available with optional probe and thermowell kit
  • Waterproof, corrosion resistant and dust-proof - meets IP66 and UL Type 4X requirements
Sulzer Process Pumps

Sulzer are the trusted manufacturer of 'process pumps' for critical industries such as petrochem.

For details on the complete range including custom adaptation of base plates / seals / paint / etc please contact the friendly Pump & Machinery team.

Sulzer Process Pumps
  • CPE ANSI pumps are specifically designed to exceed the strictest energy regulations for all industries as well as the requirements of ANSI/ASME B73.1. With revolutionary hydraulics and high efficiency, they offer the lowest life cycle costs.
  • API 610 / ISO 13709 international standard specifies requirements for overhung, between-bearings and vertically-suspended centrifugal pumps used in petroleum, petrochemical and gas industry process services.
  • CPT chemical end suction single stage centrifugal pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs. ANSI / ASME B73.1 standard covers centrifugal pumps of horizontal, end suction single stage, centerline discharge design, including dimensional interchangeability requirements and certain design features to facilitate installation and maintenance.
Tuthill Lubrication Pumps

Lubrication & Circulation Pumps

Tuthill lubrication pumps handle a wide range of viscosities and sustain a constant flow at any pressure.

Tuthill Lubrication Pumps

The 1000 Series is based on the proven internal gear principal and is enhanced in response from our OEM customers for a pump that offers advanced features which make installation easier. These side-ported pumps have the option to bolt SAE/DIN flanges onto them ensuring maximum flexibility on the porting arrangements. Our pump meets your technical requirements and is easily fitted into your system. Our manufacturing expertise and knowledge of applications enable us to provide you with an engineered solution and ensure satisfaction with post-sales service. We pride ourselves on properly servicing you with specification, installation, operation, and troubleshooting.  The pump was originally designed to meet and exceed the exacting requirements of the refrigeration compressor market.

Resources
No items found.
Sharpe Mixers

Sharpe Mixers Clamp Mounted Direct Drive and Gear Drive Portable mixers

  • White powder-coated nosecone.
  • Single or dual hyflo impellers.
  • Shaft rpm is 1750
  • This mixer line has been refined and improved over the years to assure that every component has significant advantages over other mixers on the market.
  • From the nearly indestructible white powder-coated finish to the stainless-steel mounting clamp, from the vapor-tight coupling housing to the quality-10 gearing, you can be confident that your Sharpe Mixer will look and operate like new after years of duty.

Sharpe Mixers
Standard Metering Pumps

Standard Metering Pumps are engineered to safely measure and dispense preset batches of product from drums and tanks. The unique design eliminates the need for scales and pails as product can be metered directly out of your source vessel. Available in both Industrial and Sanitary configurations.

Standard Metering Pumps

Engineered to control, measure and dispense preset volumes of liquid from drums, IBC’s, plating tanks or any large storage vessel. The air systems are ideal for high frequency, continuous duty applications. The BCS can be used in an industry where batching, chemical packaging or dilution is required to be accurate and efficient. Simply dial in the desired volume, press ENTER and the BCS delivers a preset volume of liquid virtually hands-free.

Applications

  • Chemical Packaging
  • Water Treatment Chemicals
  • Chemistry For Plating Tanks
  • Chemical Delivery

Features

  • Turbine Paddle Wheel Design
  • Measures: Gallons, Liters, Cubic Meters
  • Resettable Totalizer
  • User Friendly “In Field” Calibration
  • 7 Pre-Set Batches
  • PP & PVDF Materials of Construction
  • Relay Output Signal

Resources
No items found.
Standard Industrial Motors

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line ofExplosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.

Standard Industrial Pump Tubes

Our complete range of pump tubes provide an ideal solution for applications ranging from corrosive chemicals to light oils. Pump tubes are available in Polypropylene, PVDF, CPVC, Stainless Steeland Aluminum.

Resources
No items found.
Blackmer Regenerative Turbine Pumps

Blackmer® offers Ebsray® RC Series regenerative turbine pumps to the Americas market for LPG (propane) and Autogas applications. Regenerative turbine pumps are also known as peripheral pumps or centrifugal regenerative pumps.

Recognized as a global leader in Autogas handling applications – with decades of reliable performance in thousands of installations worldwide – Ebsray regenerative turbine pump products are known for efficiency, reliability, and performance.

Ebsray RC Series regenerative turbine pumps have been specifically designed and precision-built for high-pressure transfer in Autogas applications. The secret to the success of these pumps is the innovative impeller design, which optimizes hydraulic performance resulting in high differential pressures even at low flow rates, a critical consideration for Autogas applications. Ebsray turbine pumps also feature a smooth, quiet operation and long pump life.

Blackmer Regenerative Turbine Pumps

The regenerative turbine pump design is very unique and works on a different principle than PD pumps. The impeller is a rotating, non-contacting, free-wheeling disc which has many small buckets or cells (typically about 60) on its periphery. When liquid enters the suction port it is picked up by the impeller and instantly accelerated around in the narrow hydraulic channel (casing volute) surrounding the cells. Kinetic energy is imparted to the liquid being flung outwards by the centrifugal force from the liquid in the teeth cells, while circulating radially around the channel. 

Resources
No items found.
Lewa Process Pumps-Metering

LEWA diaphragm and plunger pumps, which are reciprocating positive displacement pumps, provide the greatest possible metering accuracy. They set the standard for safety, reliability and efficiency, especially when it comes to pumping supercritical fluids.

Every metering pump made by LEWA is designed with particular strengths: Whether your needs include energy-efficiency, low maintenance costs, or an extremely long service life for diaphragms. Or perhaps you are looking for a metering pump model that can handle supercritical fluids and liquid gas, or one that meets the highest requirements and demands of the oil and gas, chemistry, cosmetics, pharmaceutical and biotechnology, or food and beverage industry.

Lewa Process Pumps-Metering

LEWA is known worldwide as a specialist and market leader in the handling of supercritical fluids and the use of diaphragm metering pumps, packed plunger metering pumps and process pumps.

LEWA pumps provide high metering accuracy and are durable, reliable, safe and highly efficient.

Resources
No items found.
Graco Process Pumps -Air Operated Diaphram Pumps

An air operated diaphragm pump (also known as AODD pump or membrane pump) is a type of positive displacement pump that uses compressed air as a power source. The compressed air is shifted from one chamber to the other by a linked shaft that allows the chambers to move simultaneously. This back-and-forth motion, forces liquid out of one chamber and into the outlet manifold, while filling the opposite fluid chamber via the inlet manifold. Upon changeover, the fluid section that was filled on the previous shift empties into the outlet manifold and the fills the opposite chamber via the inlet manifold. The rapid changeover allows for reduced pulsation at the outlet.

WETTED COMPONENT OPTIONS

  • Acetal
  • Kynar
  • Polypropylene

CENTER SECTION

  • Polypropylene
  • Santoprene
  • PTFE

DIAPHRAGM OPTIONS

  • Supply pump for OEM applications
  • Printing ink supply
  • Chemical supply for wastewater and sanitary applications
  • Plating/surface finishing
  • Chemical dosing
  • Car wash chemicals
  • Laundry chemicals and detergents (hotel/resorts)

Graco Process Pumps -Air Operated Diaphram Pumps

Designed with fewer parts than competitive pumps, Graco’s air operated double diaphragm pumps features our stall-free, low pulsation air valve, which is externally accessible—ensuring rapid changeovers and minimum downtimes.

Graco’s electric double diaphragm pumps (EODD) are ideal for applications that require low pulsation and a smooth flow. Our energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps.

Each pump is ruggedly constructed to resist corrosion and deliver a long, trouble-free product life.

The Graco diaphragm pumps come in a wide range of air operated and electric diaphragm pumps (ATEX models available). You can also choose from a extensive selection of materials to handle numerous applications, including corrosive and abrasive fluid transfer.

Graco Process Pumps-Industrial Piston Pumps

Graco's powerful line of piston pumps move extremely difficult materials when other pump cannot. SaniForce piston pumps can offer fluid pressures up to 1,200 psi (83 bar) handling even the toughest materials. Designed for industrial or hygienic applications, Graco has a pump to suit your application.

Graco Process Pumps-Industrial Piston Pumps

Graco's powerful line of piston pumps move extremely difficult materials when others cannot. SaniForce piston pumps have fluid pressures up to 1,200 psi (83 bar) handling even the toughest materials.

Graco’s powerful line of piston pumps move difficult materials when others cannot. Fluid pressures of up to 1,200 psi (83 bar) are ideal for low to medium viscosity materials such as beverages, juices and sauces.

Quick knockdown lowers are made with corrosion resistant stainless steel and feature easy to clean sections, improving overall efficiency.

Resources
No items found.
Graco Process Pumps-Electric Diaphragm Pumps

Would you like to eliminate unnecessary pump failures for your application? Would you like to improve your facilities energy efficiency and create a quieter and cleaner work environment for your employees? Graco’s Husky e-Series pumps will help you achieve all of those items!

Graco Process Pumps-Electric Diaphragm Pumps
  • Only electric diaphragm pump on the market that will stall under pressure
  • Up to 80% more efficient than air operated diaphragm pumps
  • Reduce pulsation without the addition of pulsation dampeners
  • Patent pending technology allows pump to stall under pressure preventing pump failures from
    clogged lines or closed valves
  • Energy efficient electric drive reduces energy consumption up to 80% compared to traditional air
    operated diaphragm pumps
  • Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
  • Request a demo and see interactive information at www.graco.com/e-series

Resources
No items found.
Wilden Accessories

Wilden’s accessory products offer flexibility and value to your liquid process and expand the application range of Wilden pumps by complimenting the performance and specification of your pump. Wilden electronic controllers automate your Wilden pump for batching, and other electronically controlled dispensing applications and processes. By eliminating pump pulsation we can also create laminar process flow, or control the liquid level within a system or process.

Wilden Accessories

Features and Benefits:

       
  • Effectively dampens up to 70% of discharge pressure pulsation 
  •    
  • Protects against water hammer and associated damage    
  •    
  • Utilises the same standardised wear components as Wilden diaphragm pumps    
  •    
  • Self-adjusting to various system pressures    
  •    
  • Large solids capacity    
  •    
  • Configurable to meet ATEX II 2 GD X requirements