Applications

Chemicals

Packo Centrifugal and Side Channel Pump

The PACKO GFP challenges the laws of physics!

It is a known problem with centrifugal pumps: as soon as the pumped liquid contains more than about 8 % gas, a gas bubble builds up in the eye of the impeller and the pump loses its capacity.

The Packo GFP pump outsmarts physics. By placing a liquid ring impeller behind the centrifugal impeller, any possible build-up of a gas bubble is nipped in the bud by simply sucking it away.

In this way, our GFP pump can easily pump liquids with up to 30 % gas content. Would you like to know more? contact our technical support team to discuss your application.

Packo Centrifugal and Side Channel Pump

Max. flow 400 m³/h Max. head 30 mMax. product viscosity 1000 cP Max. motor power45 kW

Grundfos Dosing pumps

Grundfos offers a wide range of dosing pumps representing state-of-the-art technology.

Digital Dosing solutions (SMART Digital, DME, DDI) set new standards in liquid chemical handling and accuracy. The operator can easily install and set up the pump to discharge exactly the quantity of dosing liquid required for the process in a unique drive- and flow-control management concept. The setting of the pump is displayed in ml/h, l/h or gph, and the operation mode is easily identified by means of icons.

The DMH mechanical hydraulic dosing pump range is the preferred choice for industrial and complex tasks. The DMH range is a series of extremely strong, robust pumps for applications where a substantial dosing range and high-pressure capabilities are required

Grundfos Dosing pumps

Applications

The dosing pumps are designed for handling chemicals within the following applications, among others:

  • Drinking water treatment
  • Wastewater treatment
  • Cooling water treatment
  • Washing systems
  • Process water treatment
  • Chemical industry.

Features and benefits

  • Precise and easy setting
  • Unique technology
  • Small number of variants will cover all needs
  • Full pulse control
  • Pulse batch control
  • Internal timer batch control
  • Analog 0/4-20 mA control
  • Level control
  • Fieldbus communication module.

Liquid Controls LCR iQ

The future of electronic registers has arrive, and it is the LC (Liquid Controls) LCR iQ. At the center of the CENTRILOGiQ® platform is the LCR.iQ®, built from the ground up by Liquid Controls' Research & Development team and in close collaboration with customers who will benefit from it! Ease of use, process configurability, and data security were the highest priorities in the design and foundation of the LCR.iQ®.

The LCR iQ replaces the Pump & Machinery Selectronic register which has served the NZ tanker industry well for 40 plus years.

Liquid Controls LCR iQ

LCR iQ Features

User Input & Display

  • Large 7" high definition, full color video display - High clarity and easy visibility
  • Customizable home screen and delivery setup prompts - Streamline driver interface
  • Full alpha-numeric keypad and arrow selection keys - Quick, intuitive navigation
  • Instant on-board diagnostics and help screens - Quickly troubleshoot & resolve issues to minimize downtime
  • Full screen active delivery mode - Largest readable digits in the industry, viewable from up to 100'
  • Day/night mode and brightness adjustment - Operator can select preferred viewing mode for conditions
  • Customizable printed tickets - Easily tailor ticket formats without software updates
  • Transaction history logs store 10,000+ records - No more lost tickets; Easily access and print historical tickets
  • Weights & measures historical audit log and event log - Search and download by date range or field
  • Large LED back lit keypad - Easy to operate with gloved hands, easy to read in daylight or at night
  • Remote control (E-Stop) compatible to third party systems - Seamless retrofit into existing systems
  • 3rd party fleet automation connectivity and data management - Seamless retrofit into existing systems
  • Toggle flow - Optimizes fuel flow rate without driver intervention in refined fuels delivery systems
  • Wireless Printing - Operator can print from hand-held remote printer
  • Connectable with hand held devices, etc via wifi and Bluetooth.
  • Standard meter mount base - Drop-in retrofit for all conventionally mounted registers
  • Panel mount enclosure option - For remote panel mounting of LCR.iQ®
  • Preset delivery by volume or weight - Provides highest accuracy of fuel delivery to prevent over-fueling
  • 4-Bolt even seal o-ring design - Water-tight, weather-proof seal protects internal components
  • Die-cast aluminum housing - Chromate and powder coated for long term corrosion resistance.11 Conduit Ports (1/2" NPT) - To accommodate many I/O and control optionsMulti-point calibration up to 16 points - Maximize accuracy over entire flow range
  • Internal telescoping hinges - Eliminates seizing and corrosion of external door hinges
  • Serial accessibility to LCP data communication protocol - Compatible with major in-cab/back office systems
  • Electronic temperature volume compensation - Available with optional probe and thermowell kit
  • Waterproof, corrosion resistant and dust-proof - meets IP66 and UL Type 4X requirements
SPX Heat Exchangers

Pump & Machinery are proud to be SPX distributors for service and sales. In New Zealand and the South Pacific Islands the applications for industrial heat exchangers calls for a wide and deep range of products, putting great demand on the equipment. SPX FLOW's portfolio of APV ParaFlow is designed to match our industries needs, whether this is for very small flows, or the extra-large kind, up to 4500 m³/h. With the SPX selection of materials, connections and accessories, we can supply equipment for practically every heat transfer need. Additionally our long experience in after sales services, SPX FLOW and Pump & Machinery are your all-round partner for heat transfer.

The range includes: NR5 Plate Heat Exchangers, LEO Plate Heat Exchangers, ER5 Plate Heat Exchangers, VEGA Plate Heat Exchangers, PHE, PMC, Paraweld, Orion, Zephyr, Duraflow, Sirius, HE Capella.

SPX Heat Exchangers
  • Cooling, heating, condensing and evaporation
  • Plate type - gaskets, semi welded and welded plate
  • Tubular
  • Hygienic
  • Energy efficient
  • Up to 4500m³/hr
  • Service, maintenance and repair
  • Genuine original SPX spares
  • High temperature and pressure
  • -200°C to 400°C
  • 0 to 100 bar (gauge)
  • CIP
Sulzer Process Pumps

Sulzer are the trusted manufacturer of 'process pumps' for critical industries such as petrochem.

For details on the complete range including custom adaptation of base plates / seals / paint / etc please contact the friendly Pump & Machinery team.

Sulzer Process Pumps
  • CPE ANSI pumps are specifically designed to exceed the strictest energy regulations for all industries as well as the requirements of ANSI/ASME B73.1. With revolutionary hydraulics and high efficiency, they offer the lowest life cycle costs.
  • API 610 / ISO 13709 international standard specifies requirements for overhung, between-bearings and vertically-suspended centrifugal pumps used in petroleum, petrochemical and gas industry process services.
  • CPT chemical end suction single stage centrifugal pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs. ANSI / ASME B73.1 standard covers centrifugal pumps of horizontal, end suction single stage, centerline discharge design, including dimensional interchangeability requirements and certain design features to facilitate installation and maintenance.
Tuthill Lubrication Pumps

Lubrication & Circulation Pumps

Tuthill lubrication pumps handle a wide range of viscosities and sustain a constant flow at any pressure.

Tuthill Lubrication Pumps

The 1000 Series is based on the proven internal gear principal and is enhanced in response from our OEM customers for a pump that offers advanced features which make installation easier. These side-ported pumps have the option to bolt SAE/DIN flanges onto them ensuring maximum flexibility on the porting arrangements. Our pump meets your technical requirements and is easily fitted into your system. Our manufacturing expertise and knowledge of applications enable us to provide you with an engineered solution and ensure satisfaction with post-sales service. We pride ourselves on properly servicing you with specification, installation, operation, and troubleshooting.  The pump was originally designed to meet and exceed the exacting requirements of the refrigeration compressor market.

Resources
No items found.
Sharpe Mixers

Sharpe Mixers Clamp Mounted Direct Drive and Gear Drive Portable mixers

  • White powder-coated nosecone.
  • Single or dual hyflo impellers.
  • Shaft rpm is 1750
  • This mixer line has been refined and improved over the years to assure that every component has significant advantages over other mixers on the market.
  • From the nearly indestructible white powder-coated finish to the stainless-steel mounting clamp, from the vapor-tight coupling housing to the quality-10 gearing, you can be confident that your Sharpe Mixer will look and operate like new after years of duty.

Sharpe Mixers
Standard Metering Pumps

Standard Metering Pumps are engineered to safely measure and dispense preset batches of product from drums and tanks. The unique design eliminates the need for scales and pails as product can be metered directly out of your source vessel. Available in both Industrial and Sanitary configurations.

Standard Metering Pumps

Engineered to control, measure and dispense preset volumes of liquid from drums, IBC’s, plating tanks or any large storage vessel. The air systems are ideal for high frequency, continuous duty applications. The BCS can be used in an industry where batching, chemical packaging or dilution is required to be accurate and efficient. Simply dial in the desired volume, press ENTER and the BCS delivers a preset volume of liquid virtually hands-free.

Applications

  • Chemical Packaging
  • Water Treatment Chemicals
  • Chemistry For Plating Tanks
  • Chemical Delivery

Features

  • Turbine Paddle Wheel Design
  • Measures: Gallons, Liters, Cubic Meters
  • Resettable Totalizer
  • User Friendly “In Field” Calibration
  • 7 Pre-Set Batches
  • PP & PVDF Materials of Construction
  • Relay Output Signal

Resources
No items found.
Standard Industrial Motors

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line ofExplosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.

Standard Industrial Pump Tubes

Our complete range of pump tubes provide an ideal solution for applications ranging from corrosive chemicals to light oils. Pump tubes are available in Polypropylene, PVDF, CPVC, Stainless Steeland Aluminum.

Resources
No items found.
Standard 3A Certified Pumps

Our 3A Sanitary Pumps are a hygienic solution specifically designed for the dairy process industry. The 3A pumps feature over-molded diaphragms and a swivel stand.

Standard 3A Certified Pumps

Our 3A Sanitary Pumps are a hygienic solution specifically designed for the dairy process industry. The 3A pumps feature over-molded diaphragms and a swivel stand.

Sizes from 40mm to 100mm pumps,Ideal for Poultry,Large Solids, a very versatile pump for the Food Processing Industry.

Resources
No items found.
Blackmer-Screw Pumps

Blackmer® S Series screw pumps are self-priming, double-ended, positive displacement pumps that offer outstanding performance in the most demanding applications regardless of temperature, viscosity or pressure. The twin and triple screw designs provide complete axial balancing of the rotating screws and their timing technologies eliminate metal-to-metal contact within the pump.

Blackmer-Screw Pumps

Blackmer S Series pumps are available in four distinct lines, each having multiple model configurations and sizes: twin screw (WTG), twin screw with non-timing gear (NTG), multi-phase twin screw, and triple screw. Other features of Blackmer S Series pumps include compact design, ability to run dry for short periods, high suction lift and constant flow rates despite varying conditions. They are low noise and nearly pulsation-free with little fluid agitation, making them ideal for use with corrosive and non-corrosive, low or high viscosity, and clean or abrasive liquids.

Blackmer Regenerative Turbine Pumps

Blackmer® offers Ebsray® RC Series regenerative turbine pumps to the Americas market for LPG (propane) and Autogas applications. Regenerative turbine pumps are also known as peripheral pumps or centrifugal regenerative pumps.

Recognized as a global leader in Autogas handling applications – with decades of reliable performance in thousands of installations worldwide – Ebsray regenerative turbine pump products are known for efficiency, reliability, and performance.

Ebsray RC Series regenerative turbine pumps have been specifically designed and precision-built for high-pressure transfer in Autogas applications. The secret to the success of these pumps is the innovative impeller design, which optimizes hydraulic performance resulting in high differential pressures even at low flow rates, a critical consideration for Autogas applications. Ebsray turbine pumps also feature a smooth, quiet operation and long pump life.

Blackmer Regenerative Turbine Pumps

The regenerative turbine pump design is very unique and works on a different principle than PD pumps. The impeller is a rotating, non-contacting, free-wheeling disc which has many small buckets or cells (typically about 60) on its periphery. When liquid enters the suction port it is picked up by the impeller and instantly accelerated around in the narrow hydraulic channel (casing volute) surrounding the cells. Kinetic energy is imparted to the liquid being flung outwards by the centrifugal force from the liquid in the teeth cells, while circulating radially around the channel. 

Resources
No items found.
Blackmer Centrifugal Pumps

The System One Centrifugal Pumps are designed specifically to operate in severe process industry applications, and contain oversized bearings to offer greater load capacity and extended bearing life. These pumps increase productivity, while offering maximum reliability in the toughest of applications, such as mining de-watering, chemical process and water/wastewater treatment.

Blackmer Centrifugal Pumps

The simplest type of centrifugal pump is the single stage machine that consists fundamentally of a rotating element, called an impeller, and a casing. Liquid is led to the eye or center of the impeller and is set into rotation by the impeller vanes. By virtue of centrifugal force the liquid is thrown from the rim or periphery of the impeller with a considerable velocity and pressure. The casing, which closely surrounds the impeller, has a volute shaped passage of increasing area, which collects the liquid leaving the impeller, and converts a portion of its velocity energy into additional pressure energy. This casing passage leads to the discharge nozzle of the pump where it is forced into the discharge piping.

Resources
No items found.