Applications

Transportation

Carver Pump Ltd RS Multistage,Ring Section Pump

Multistage, Ring Section Pump

Our process duty, horizontal ring section multistage pump. Designed for moderate to high-pressure pumping, the RS is available in seven basic sizes with overall performance to 2,600 HP.

Carver Pump Ltd RS Multistage,Ring Section Pump

For Pressures to 1,500 PSI

The RS is offered with Class 300 ANSI R.F. inlet flanges and Class 600 or 900 ANSI R.F. discharge flanges, depending on the pressures and number of stages involved. Hydraulic performance extends to 2,000 GPM and 3,400 ft. TDH, making it ideally suited for the most demanding industrial and process applications.

The RS design incorporates a product-lubricated, advanced composite material, sleeve-type radial bearing at the outboard (discharge) end. The thrust bearings are two matched angular contact ball bearings located at the inboard (suction) end of the pump. An optional outboard mechanical seal with an inboard radial ball bearing is also available. The RS has oil-lubricated ball bearings, which can be water cooled. Larger units can also be fan cooled.

The available materials of construction, from ductile iron to duplex stainless steel, offer combinations suitable for all applications from general water services to light abrasives and corrosive applications. Our proprietary advanced composite material, available for wear rings and interstage bushings, offers high-temperature performance, and exceptional resistance to wear and corrosion.

Tuthill Lubrication Pumps

Lubrication & Circulation Pumps

Tuthill lubrication pumps handle a wide range of viscosities and sustain a constant flow at any pressure.

Tuthill Lubrication Pumps

The 1000 Series is based on the proven internal gear principal and is enhanced in response from our OEM customers for a pump that offers advanced features which make installation easier. These side-ported pumps have the option to bolt SAE/DIN flanges onto them ensuring maximum flexibility on the porting arrangements. Our pump meets your technical requirements and is easily fitted into your system. Our manufacturing expertise and knowledge of applications enable us to provide you with an engineered solution and ensure satisfaction with post-sales service. We pride ourselves on properly servicing you with specification, installation, operation, and troubleshooting.  The pump was originally designed to meet and exceed the exacting requirements of the refrigeration compressor market.

Resources
No items found.
Standard Industrial Motors

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line ofExplosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.

Standard Industrial Pump Tubes

Our complete range of pump tubes provide an ideal solution for applications ranging from corrosive chemicals to light oils. Pump tubes are available in Polypropylene, PVDF, CPVC, Stainless Steeland Aluminum.

Resources
No items found.
NETZSCH Lobe Pumps

Rotary lobe pumps are equally suitable for low and high-viscous media. Due to their large free ball passage and low rotational speed they are relatively tolerant to blockage and solid materials in the medium. Varying solid content and thereby caused pressure variations are no factor to the flow. Their performance capacity is higher than that of many other positive displacement pumps of the same type. As energy is the most decisive factor of life cycle costs this is one of the most important benefits of this pump technology.

NETZSCH Lobe Pumps
Delivery characteristics of a rotary lobe pump
  • Flow rate up to 1000 m³/h
  • Pressure up to 10 bar
  • Speed: up to 500 rpm
  • Free ball passage: up to 70 mm

Resources
No items found.
Fill-Rite Piston Hand Pumps

Fill-Rite Fuel Transfer Pumps are manufactured by Tuthill Pumps. Options for this rugged, reliable range of pumps include AC, DC and hand operated pumps for stationary and mobile fuel transfer applications.

Tough,Reliable,Long-Lasting. Fill-Rite hand pumps deliver fluids quickly and easily.Whether your transferring gasoline,oil or diesel,select from a variety of Fill-Rite hand Pumps.

Fill-Rite Piston Hand Pumps
  • Port Size: 50mm tank adapter
  • Max. Flow Rate: 76 litres per 100 strokes
  • Construction Materials: Aluminium/Stainless Steel liner.
  • Applications: Suitable for decanting of petrol, oil and approved fluids

Resources
No items found.
Fortvale Products - Valves & Couplings

Fort Vale are precision engineers, designers and manufacturers of stainless steel valves, api fuel transfer couplers, self sealing couplers, tank container fittings, liquid transport fittings and tanker vehicle fittings for the safe transportation of liquids, powders, and gases; we are also suppliers of ISO tanks, and rail tanks.

Fortvale Products - Valves & Couplings

Fort Vale manufacture predominantly in Stainless Steel,but we have also experience in working with many different materials including titanium,duplex,high-nickel alloys (CW-12MW and N10276) and carbon steel.

Fort Vale manufacture Airline Valves,Ball Valves,Butterfly Valves,Couplers and Loading Arms,Dry Disconnect Couplings,Foot valves,Inspection Hatch Assemblies,Manlid Assemblies, Relief Valves,Ancillaries and spares

Resources
No items found.
Corken Rotary Vane Pumps

The positive displacement, sliding-vane design is well suited for higher capacity, medium head pumping applications. The sliding vane design is unique because it can handle small amounts of vapor formed at the pump suction, and the vanes are self-adjusting for extended wear. A variety of sealing options are available and the range includes magnetically coupled pumps.

Corken Rotary Vane Pumps

Corken offers several industrial sliding vane pumps for a wide range of vapor pressures, differential pressures, and viscosities. All industrial pumps are equipped with an adjustable internal relief valve and feature self-adjusting sliding vanes and vane drivers to improve pumping efficiency. And, maintenance is simple. Removing the pump cover gives full access to the rotor, cam, sideplates, seals, and bearings. Drive options include gear reducer, V-belt, and hydraulic.

Suitable liquids include but are not limited to aviation fuel, fuel oil, lube oil, solvents, and liquefied gases such as LPG, ammonia, and carbon dioxide.

           

Resources
No items found.
Blacoh Sentry Sanitary Plastic Pulsation Dampeners

Any type of fluid pump such as Air Operated Double Diaphragm, Metering, Hose, or Centrifugal pump will ultimately create uneven pulses in your system just due to its fluctuating nature.  However, over time this will quickly wear out the components of your pump as well as the overall system, often leading to sudden cracks in the pump or damage to the equipment.                    

A pulsation dampener is designed to absorb and give pressure when needed in order to smooth out the flow and reduce up to 99% of pulsation and shock in the system. Don’t wait until it’s too late; protect your system from the beginning.  Learn more about dampeners for any application:

Blacoh Sentry Sanitary Plastic Pulsation Dampeners

SENTRY FEATURES:                          

 

2. Simple, reliable design and quick installation

 3. Easy in-line maintenance

 4.  Pressure ranges up to 10,000 psi (689.4 bar) available from stock   

5.  Temperature ranges from -60°F to +400°F (-51°C to +205°C) available

 6.  Custom models, larger sizes and higher pressure ratings available on request. Contact Pump&Machinery for more information.

 7.   Bodies available in a full range of chemically resistant materials  

8.   Bladders available for even the most corrosive applications                                                                     

*

                                                           

*

                                                                                                                                              

(optional)

                                                                                                                                          

*

                                                                                                                                           

*

                                    .                                                                                                              

*

                                   

*

                                   

Resources
No items found.
Grundfos Stainless Steel Submersible Pumps

The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.

The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.

All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.

Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.

An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.

Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.

Grundfos Stainless Steel Submersible Pumps

ModelVoltagePhaseWattageHPHeadFlow RateOutletUNILIFT AP12.40.04.A1240vSingle0.40.511m250 LPM1 1/2" (40mm)UNILIFT AP12.40.04.A3415vThree0.40.511m250 LPM1 1/2" (40mm)UNILIFT AP12.40.06.A1240vSingle0.60.813m300 LPM1 1/2" (40mm)UNILIFT AP12.40.06.A3415vThree0.60.813m300 LPM1 1/2" (40mm)UNILIFT AP12.40.08.A1240vSingle0.81.014m350 LPM1 1/2" (40mm)UNILIFT AP12.40.11.A1240vSingle1.11.516m550 LPM2" (50mm)

Please Note: 

A1 models include float switch for automatic operation
A3 models include float switch (10m) and control box with contactor and overload

* 50Hz
* Cable- 10m
* Particle Size-12mm
* Liquid temperature 0 °C to 55 °C Max
* pH concentration: 4 to 10
* Max. installation depth: 10 m


(Please enquire about models with no float switches)