Industry

Pharmaceutical

Pharmaceutical

New Zealand is a tightly regulated production market for pharmaceuticals which enables high levels of consumer trust. The critical element in selecting pharmaceutical pumps is cleanliness and this includes the ability to offer CIP and SIP. Our range of hygienic pumps from Packo, JEC, Netzsch, Wilden & Nomad offer the following international standards: EHEDG, 3A, ATEX, FDA, QHD, US Pharma.

Carver Pump Ltd RS Multistage,Ring Section Pump

Multistage, Ring Section Pump

Our process duty, horizontal ring section multistage pump. Designed for moderate to high-pressure pumping, the RS is available in seven basic sizes with overall performance to 2,600 HP.

Carver Pump Ltd RS Multistage,Ring Section Pump

For Pressures to 1,500 PSI

The RS is offered with Class 300 ANSI R.F. inlet flanges and Class 600 or 900 ANSI R.F. discharge flanges, depending on the pressures and number of stages involved. Hydraulic performance extends to 2,000 GPM and 3,400 ft. TDH, making it ideally suited for the most demanding industrial and process applications.

The RS design incorporates a product-lubricated, advanced composite material, sleeve-type radial bearing at the outboard (discharge) end. The thrust bearings are two matched angular contact ball bearings located at the inboard (suction) end of the pump. An optional outboard mechanical seal with an inboard radial ball bearing is also available. The RS has oil-lubricated ball bearings, which can be water cooled. Larger units can also be fan cooled.

The available materials of construction, from ductile iron to duplex stainless steel, offer combinations suitable for all applications from general water services to light abrasives and corrosive applications. Our proprietary advanced composite material, available for wear rings and interstage bushings, offers high-temperature performance, and exceptional resistance to wear and corrosion.

Grundfos Dosing pumps

Grundfos offers a wide range of dosing pumps representing state-of-the-art technology.

Digital Dosing solutions (SMART Digital, DME, DDI) set new standards in liquid chemical handling and accuracy. The operator can easily install and set up the pump to discharge exactly the quantity of dosing liquid required for the process in a unique drive- and flow-control management concept. The setting of the pump is displayed in ml/h, l/h or gph, and the operation mode is easily identified by means of icons.

The DMH mechanical hydraulic dosing pump range is the preferred choice for industrial and complex tasks. The DMH range is a series of extremely strong, robust pumps for applications where a substantial dosing range and high-pressure capabilities are required

Grundfos Dosing pumps

Applications

The dosing pumps are designed for handling chemicals within the following applications, among others:

  • Drinking water treatment
  • Wastewater treatment
  • Cooling water treatment
  • Washing systems
  • Process water treatment
  • Chemical industry.

Features and benefits

  • Precise and easy setting
  • Unique technology
  • Small number of variants will cover all needs
  • Full pulse control
  • Pulse batch control
  • Internal timer batch control
  • Analog 0/4-20 mA control
  • Level control
  • Fieldbus communication module.

SPX Heat Exchangers

Pump & Machinery are proud to be SPX distributors for service and sales. In New Zealand and the South Pacific Islands the applications for industrial heat exchangers calls for a wide and deep range of products, putting great demand on the equipment. SPX FLOW's portfolio of APV ParaFlow is designed to match our industries needs, whether this is for very small flows, or the extra-large kind, up to 4500 m³/h. With the SPX selection of materials, connections and accessories, we can supply equipment for practically every heat transfer need. Additionally our long experience in after sales services, SPX FLOW and Pump & Machinery are your all-round partner for heat transfer.

The range includes: NR5 Plate Heat Exchangers, LEO Plate Heat Exchangers, ER5 Plate Heat Exchangers, VEGA Plate Heat Exchangers, PHE, PMC, Paraweld, Orion, Zephyr, Duraflow, Sirius, HE Capella.

SPX Heat Exchangers
  • Cooling, heating, condensing and evaporation
  • Plate type - gaskets, semi welded and welded plate
  • Tubular
  • Hygienic
  • Energy efficient
  • Up to 4500m³/hr
  • Service, maintenance and repair
  • Genuine original SPX spares
  • High temperature and pressure
  • -200°C to 400°C
  • 0 to 100 bar (gauge)
  • CIP
Tuthill Lubrication Pumps

Lubrication & Circulation Pumps

Tuthill lubrication pumps handle a wide range of viscosities and sustain a constant flow at any pressure.

Tuthill Lubrication Pumps

The 1000 Series is based on the proven internal gear principal and is enhanced in response from our OEM customers for a pump that offers advanced features which make installation easier. These side-ported pumps have the option to bolt SAE/DIN flanges onto them ensuring maximum flexibility on the porting arrangements. Our pump meets your technical requirements and is easily fitted into your system. Our manufacturing expertise and knowledge of applications enable us to provide you with an engineered solution and ensure satisfaction with post-sales service. We pride ourselves on properly servicing you with specification, installation, operation, and troubleshooting.  The pump was originally designed to meet and exceed the exacting requirements of the refrigeration compressor market.

Resources
No items found.
Sharpe Mixers

Sharpe Mixers Clamp Mounted Direct Drive and Gear Drive Portable mixers

  • White powder-coated nosecone.
  • Single or dual hyflo impellers.
  • Shaft rpm is 1750
  • This mixer line has been refined and improved over the years to assure that every component has significant advantages over other mixers on the market.
  • From the nearly indestructible white powder-coated finish to the stainless-steel mounting clamp, from the vapor-tight coupling housing to the quality-10 gearing, you can be confident that your Sharpe Mixer will look and operate like new after years of duty.

Standard Metering Pumps

Standard Metering Pumps are engineered to safely measure and dispense preset batches of product from drums and tanks. The unique design eliminates the need for scales and pails as product can be metered directly out of your source vessel. Available in both Industrial and Sanitary configurations.

Standard Metering Pumps

Engineered to control, measure and dispense preset volumes of liquid from drums, IBC’s, plating tanks or any large storage vessel. The air systems are ideal for high frequency, continuous duty applications. The BCS can be used in an industry where batching, chemical packaging or dilution is required to be accurate and efficient. Simply dial in the desired volume, press ENTER and the BCS delivers a preset volume of liquid virtually hands-free.

Applications

  • Chemical Packaging
  • Water Treatment Chemicals
  • Chemistry For Plating Tanks
  • Chemical Delivery

Features

  • Turbine Paddle Wheel Design
  • Measures: Gallons, Liters, Cubic Meters
  • Resettable Totalizer
  • User Friendly “In Field” Calibration
  • 7 Pre-Set Batches
  • PP & PVDF Materials of Construction
  • Relay Output Signal

Resources
No items found.
Standard Industrial Motors

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line ofExplosion Proof, TEFC, Open Drip-Proof and Air motors provide durability and safety regardless of the environment.

Standard Industrial Pump Tubes

Our complete range of pump tubes provide an ideal solution for applications ranging from corrosive chemicals to light oils. Pump tubes are available in Polypropylene, PVDF, CPVC, Stainless Steeland Aluminum.

Resources
No items found.
Standard 3A Certified Pumps

Our 3A Sanitary Pumps are a hygienic solution specifically designed for the dairy process industry. The 3A pumps feature over-molded diaphragms and a swivel stand.

Standard 3A Certified Pumps

Our 3A Sanitary Pumps are a hygienic solution specifically designed for the dairy process industry. The 3A pumps feature over-molded diaphragms and a swivel stand.

Sizes from 40mm to 100mm pumps,Ideal for Poultry,Large Solids, a very versatile pump for the Food Processing Industry.

Resources
No items found.
Lewa Process Pump-Metering Packages

Petrochemicals generate starting products for the manufacture of plastics, pharmaceuticals, colorants, detergents, and other products. The most important operations are the various splitting or cracking processes (e.g. steam cracking, hydrocracking). These processes convert long-chained hydrocarbons (e.g., naphtha) into short-chained ones.

LEWA supports your production plants with effective additive metering, as well as with the conveying and treatment of washing water and sour water.

LEWA offers you specialized solutions for the metering and conveyance of the required chemicals and products. We design pumps and systems to suit your requirements and offer you all-round support for processes such as hydrocracking.

Lewa Process Pump-Metering Packages

Petrochemicals generate starting products for the manufacture of plastics, pharmaceuticals, colorants, detergents, and other products. The most important operations are the various splitting or cracking processes (e.g. steam cracking, hydrocracking). These processes convert long-chained hydrocarbons (e.g., naphtha) into short-chained ones.

LEWA supports your production plants with effective additive metering, as well as with the conveying and treatment of washing water and sour water.

LEWA offers you specialized solutions for the metering and conveyance of the required chemicals and products. We design pumps and systems to suit your requirements and offer you all-round support for processes such as hydrocracking.

Resources
No items found.
Lewa Process Pumps -Centrifugal

LEWA is known worldwide as a specialist and market leader in the handling of supercritical fluids and the use of diaphragm metering pumps, packed plunger metering pumps and process pumps.

LEWA pumps provide high metering accuracy and are durable, reliable, safe and highly efficient.

Lewa Process Pumps -Centrifugal

The Nikkiso Non-Seal centrifugal canned motor pump has been designed specifically for the chemical industry. There, it is used for metering critical fluids. To do this, the centrifugal pump is designed in accordance with API 685.

Resources
No items found.
Lewa Process Pumps-Metering

LEWA diaphragm and plunger pumps, which are reciprocating positive displacement pumps, provide the greatest possible metering accuracy. They set the standard for safety, reliability and efficiency, especially when it comes to pumping supercritical fluids.

Every metering pump made by LEWA is designed with particular strengths: Whether your needs include energy-efficiency, low maintenance costs, or an extremely long service life for diaphragms. Or perhaps you are looking for a metering pump model that can handle supercritical fluids and liquid gas, or one that meets the highest requirements and demands of the oil and gas, chemistry, cosmetics, pharmaceutical and biotechnology, or food and beverage industry.

Lewa Process Pumps-Metering

LEWA is known worldwide as a specialist and market leader in the handling of supercritical fluids and the use of diaphragm metering pumps, packed plunger metering pumps and process pumps.

LEWA pumps provide high metering accuracy and are durable, reliable, safe and highly efficient.

Resources
No items found.
Graco Process Pumps - Drum Unloaders

Many food manufacturers are still emptying barrels and drums by hand, this back breaking work is labour intensive and unproductive. Graco container evacuation systems (drum unloaders) solve this problem. They are designed with numerous built-in features to protect foods from contamination. Graco's piston pumps are built with sanitary flanges, quick knockdown connections and a FDA-compliant air motor shroud, making cleaning and sanitization an easy process. The unloading systems are equipped with a pump ram with follower plate and inflatable seal protecting ingredients from external contamination and bacteria, leading to safer operations over dumping and scooping.

Graco seals inflate to conform to the container type and shape, providing evacuation rates up to 99% by cleanly wiping down the container's sides. The inflating seals are capable of accommodating ribs and slightly tapered barrels designs.

Contact Pump & Machinery for more details

Graco Process Pumps - Drum Unloaders

There is no need to dilute materials with Graco's powerful bin and drum unloaders. Our pumps handle high viscosity materials such as peanut butter, frostings, toothpaste, corn syrup and heavy chocolate. (Viscosities up to 1,000,000 cps)

For system flexibility, you can configure our bin unloaders with either double ball or priming piston designs. Each is designed and built to fulfill your technical requirements.

Graco Process Pumps -Air Operated Diaphram Pumps

An air operated diaphragm pump (also known as AODD pump or membrane pump) is a type of positive displacement pump that uses compressed air as a power source. The compressed air is shifted from one chamber to the other by a linked shaft that allows the chambers to move simultaneously. This back-and-forth motion, forces liquid out of one chamber and into the outlet manifold, while filling the opposite fluid chamber via the inlet manifold. Upon changeover, the fluid section that was filled on the previous shift empties into the outlet manifold and the fills the opposite chamber via the inlet manifold. The rapid changeover allows for reduced pulsation at the outlet.

WETTED COMPONENT OPTIONS

  • Acetal
  • Kynar
  • Polypropylene

CENTER SECTION

  • Polypropylene
  • Santoprene
  • PTFE

DIAPHRAGM OPTIONS

  • Supply pump for OEM applications
  • Printing ink supply
  • Chemical supply for wastewater and sanitary applications
  • Plating/surface finishing
  • Chemical dosing
  • Car wash chemicals
  • Laundry chemicals and detergents (hotel/resorts)

Graco Process Pumps -Air Operated Diaphram Pumps

Designed with fewer parts than competitive pumps, Graco’s air operated double diaphragm pumps features our stall-free, low pulsation air valve, which is externally accessible—ensuring rapid changeovers and minimum downtimes.

Graco’s electric double diaphragm pumps (EODD) are ideal for applications that require low pulsation and a smooth flow. Our energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps.

Each pump is ruggedly constructed to resist corrosion and deliver a long, trouble-free product life.

The Graco diaphragm pumps come in a wide range of air operated and electric diaphragm pumps (ATEX models available). You can also choose from a extensive selection of materials to handle numerous applications, including corrosive and abrasive fluid transfer.