Agriculture

The Grundfos CR vertical, multistage, centrifugal in-line pump family works for water supply, water treatment and almost any industrial solution – including those for high-pressure, hot, dangerous, flammable and aggressive liquids.

Now, the range has been upgraded with a new, more robust generation of CR pumps (CR 95, CR 125 and CR 155), offering an optimised hydraulic design for world-class energy efficiency.

Thanks to a small footprint, the pumps are also easier and less costly to install than comparable pumps.

The new CR pumps have been developed using simulation-driven design to perfect every single component and have been field-tested around the world, so you can install and operate the range with total confidence.

The CMB is the horizontal alternative

‍

High Pressure Pumps: Multistage Horizontal High-Pressure Centrifugal Pump.

Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.

Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.  

The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.

‍

Pump & Machinery Co Ltd is distributing All Prime pumps to many different waste water industries. They are high quality Solids-Handling Self-Priming Centrifugal Pumps that perform to very high standards. The All Prime Pumps range is very competitively priced and has rapidly gained market share in the USA and other parts of the world.

The All Prime pump range has been readily accepted in New Zealand, as it has been in the USA and other parts of the world, where it is considered a cost effective, quality pump achieving high standards of performance.

‍

Heavy duty cast Ni Al bronze & cast 316 stainless steel, self priming, centrifugal electric drive pumps with high pressure and flows available in a range of sizes from 1” through to 4”.  

‍

‍

The Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.

The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.

All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.

Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.

An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.

Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.

‍

The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage for small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable.

Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effective prices with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs.

The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life.

‍